Questions about this article, topic, or product? Click here. 

List of Enhancements and Resolved issues 10.05.02.51 (Abstract out of over 350 fixes)

ID                Title

1055426 imodel publishing for 2.0 format and Bim Bridge is implemented
1109097 The rebar and concrete bar data are always loaded into the Manual Marking dialog box
1113971 PolyCut Openings are not disappearing when the Polyline was in offset after a model file reboot
1124410 PS Modification Properties are now exporting to the bim file
1125191 Group data is a property now in the .bim file format
1106179 AutoLabels - The Label position is not shifted in the output drawing
1086920 3D group export command is being extended for the IFC export
949957 copied model work-frames are displayed in the select view dialog
1131632 MicroStation Connector is not anymore reported instead of ProStructures Connector in iModel Repository when an iModel is published using key-in.
1126425 Mechanical devices are created on the same level as the 3D rebar.
1127415 iModel bridge workflow for BAS is implemented
1120914 Drills on the top flange appear always correctly when a welded shape is dropped.
1120915 2D details of flange plates of welded I shape shows both flange holes accurate
1120919 Welded I shape top and bottom plate get different numbers when needed
1120935 In drawing part list of welded I shape 2D detail shows correct plate thickness
1111528 AutoLabel - Copy bar attributes from dgnlib to output dgn is now implemented
1123305 Fudge Bar dialog - Distance and multiplier options are localized.
1124049 Export Item Types attached to ProConcrete Shapes and Concrete Solid Reference to IFC is implemented
1124050 Export Item Types attached to Single Rebar, RebarSets to IFC is implemented
1124412 Anchor Bolt properties are exported to bim file
1124473 Bolt properties are exporting to bim file
1124462 Base Plate Dowel Properties are exporting to bim file
1094855 ProSteel: Stiffener Distribution tool works for Welded shapes
1113512 Hole diameter text is correctly sized when we create a 2D drawing via DC Express with the border frame which has an annotation scale greater than 1:1
1106499 Stiffeners on Welded I-shapes get resized based on change of the section size
998545 Batch export of individual Groups / Sub Groups / Assemblies to separate IFC file with metadata is implemented
1118832 Rebar is not placed outside of concrete wall boundaries after updating wall reinforcements
1114957 Fudging/nudging 2D bars  implemented
1113743 PolyCuts are implemented with Irregular dispatch reinforcing rebar set
1102726 In Concrete Partlist the position number is sorting properly in ascending order in all cases
1113155 NC Data – Drilled holes are appearing in NC Viewer for Bent Plates correctly
1119297 Match & Extend - Wall footing is getting placed in the correct location with Imperial units 
1119397 Match & Extend - In T joint wall it's possible now to select the Rebar direction for 2nd leg
1119401 Match & Extend - In T joint wall, 2nd leg is taking anchorage length correctly
1119407 Match & Extend - Previously used End condition data must not be cleared from the Single rebar distribution dialog before rebar getting placed
1115401 AK block of bend plates is accurate
388782 option no subpart grips when plotting is working
1097894 One can use text styles from dgnlib in ProStructures for Shape labels
939083 Add single tie in a circular concrete column is implemented
1093369 Improved right-click behavior in Detail Center
1098428 Stiffener distribution tool is working with straight welded I-shapes
1008423 PolyCut RebarSet – PolyCut is created on the RebarSet if its parent concrete element is Pad footing
1008426 PolyCut RebarSet – PolyCut is created on the RebarSet if its parent concrete element is Continuous footing
876101 Circular MS solid elements can be reinforced now with any of the special reinforcement types
Recommended
Related
Communities
Support and Services
Training and Learning
Social Media