When assigning rebar marks generated using concrete positioning, there are instances where marking preference can't be accommodate. In this case, Manual Marking is a perfect tool to be used as it allows user-defined marks (User Marks) to 3D Rebars in addition to the regular bar marks.
The Manual Bar Mark Manager can be accessed from: Concrete workflow > Data/Reporting > Numbering, Marking > Manual Marking
In the Manual Bar Mark Manager dialog, the following settings can be utilized as per your preference.A. Load Rebar Settings
B. Refresh Option Setting
C. Locate Option Settings
When one or more of these settings is used, the Locate Rebar Element(s) in Model will be enabled.
D. Clear Option Setting
E. Group Rebar Settings
F. Apply Settings