You are currently reviewing an older revision of this page.
Artikel auf Deutsch: ProSteel / ProStructures WAS IST NEU und FIXES
This release includes the following:
ProStructures SELECTseries 5 for MicroStation - Update 1:
User need to select the base point of the work frame and the x axis direction of the work frame.
After user select the target shapes, a work frame will be created by the start and end point of the selected vertical shapes.
The ISO view should be in “Transparent” or “Model” render mode by default (on MicroStation).
After the command executed, the other member in the model except the selected one (or some accompanied parts. See detailed definition below) will be hidden.
The command will save the new 4 views as a view group as “Isolate view group”.
The view settings will be persistent after user select the “save setting” command. BUT the hidden state of the previous isolated part(s) will not be recovered.
The command will invoked by select and right click the menu.
The command will has a main menu: Isolate view and some sub menus:
Single part
Isolate the single part and fit it as center on each view.
By connection
If the selected part belongs to one or more connections, isolate the part and all the part belongs to that connection(s). If the parts belongs to multiple connection.
By Group
If the selected part is belongs to one or more groups, the parts belongs to the group(s) will also be isolated
By groups and adjacent parts
In addition to the parts in “By connection”, also isolate the parts that has a “logic link” with the parts inside the group. EVEN that part is not the selected one.
By Assemblies
If the selected the part is part of an assembly, isolate the assembly’s parts also
By assemblies and adjacent parts
In addition to the parts in “By Assemblies”, also isolate the parts that has a “logic link” with the parts inside the group. EVEN that part is not the selected one.
ProStructures SELECTseries 5 for AutoCAD: