You are currently reviewing an older revision of this page.
Bolts are not place in existing holes
Either for the existing Diameter, workloose and griplength, a bolt is not existing in the database or wrong gap and angle settings are set in the dialog
the gap and angle should be always correspond to the existing gap between elements in the modell and can not be less than1. (Should never be exactly 0 as than no bolt can be placed as in CAD systems there is always a minimum tolerance).
Check the Database (like NascBolts.mdb i n the Data / Bolts folder)
Check if for the Diameter a needed Griplenght is existing.
Gripmax value washer heights minus nut heights is the maximum griplenght
Product TechNotes and FAQs
Bentley Technical Support KnowledgeBase
Bentley LEARN Server
Bentley's Technical Support Group requests that you please confine any comments you have on this Wiki entry to this "Comments or Corrections?" section. THANK YOU!