You are currently reviewing an older revision of this page.
In order to create a ProSteel conical pipe be sure to start with a simple line, not a poly- or smartline!
1) Draw a simple line with the basic program.
2) Choose "Conical Pipe" from the toolbox "Primitives".
3) "Select axis of cone" by selecting the line.
4) "Specify lower/ upper/ inner/ outer diameter" by numerical entry.
Product TechNotes and FAQs
Bentley Technical Support KnowledgeBase
Bentley LEARNServer
Bentley's TechnicalSupport Group requests that you please confine any comments you have on thisWiki entry to this "Comments or Corrections?" section. THANK YOU!