Hi All,
I model in Bentley RailTrack V8i (Select Series 2). I have problem with templates which include component with End Condition. This component finds existing terrain (Triangulated model from RailTrack). I set up slope of cut 1:1,75 (57,14 %).
But sometimes I have problem with different slopes from the same templates. For Example, unpaved ditch:
But on another place with the same template - the slope is really different!
Didn´t you have any experience like this?
Another problem with that - I have for example 8 components in the same place - It could be connected with that.
Thank you
Regards
Petr Vocedalek
Check out this post and see if it will solve your problem .
communities.bentley.com/.../problem-in-creating-cross-section-in-series2
Hello Jeffrey, thank you for help.
But it doesn´t work. I have still inccorect slope of cut. See Picture - purple line is from modeling:
Maybe it could be my version of RT - Select series 2 - V08.11.07.615.
PV
This looks like an issue that can be fixed. What do your template drops look like in this area (what is your drop frequency)? Is this location in a transition between templates? Are your template drops at least as frequent as your sections are cut (for example if you are cutting your sections at 50' intervals, are your template drops less than 50')?
If you could paste a screenshot of the template drops, the point properties, and the end condition component properties, that may help. Also at what station this is happening and if it is happening in an isolated location or seemingly random locations.
I have seen things similar to this happen and it is usually one of those issues.