Complex S&C Creation

I am working on a project where I need to place type 1 and 2 tandems on BRT.  However, I can not find any existing Turnout libraries that have any already available.  Does anyone know where I could find them or how to create a new turnout in a library please?

Parents
  • It is not so difficult to create a new turnout in the library. Just open the library and use the new button. You then have to choose the type Single, double or diamond.
    Of course you need the required information. The schematic button will help you to identify the parameters. The Verify button could set the geometry in the turnout but you can add/delete/edit elements using a right click on the bottom of the dialog.



Reply
  • It is not so difficult to create a new turnout in the library. Just open the library and use the new button. You then have to choose the type Single, double or diamond.
    Of course you need the required information. The schematic button will help you to identify the parameters. The Verify button could set the geometry in the turnout but you can add/delete/edit elements using a right click on the bottom of the dialog.



Children
No Data