BRT fails to open on startup.

RE: BRT fails to open on startup.

Steven Taylor — Thu, 21 Feb 2019 13:03:02 GMT

Nice one - not quite sure why this would even happen but a little bit pleased it isn't just me having this issue.

For others, here is the fix...

Locate C:\Program Files (x86)\Bentley\MicroStation V8i (SELECTseries)\MicroStation\config\appl\RailTrack.3.1.cfg

On the 8th line down change InRoads Group from the following path to Rail Track

INROADS_PATH=${registryread{"HKEY_LOCAL_MACHINE\SOFTWARE\WOW6432Node\Bentley\InRoads Group(SELECTseries 4)\08.11.09\PathName"}}

Suggest you check your registry path first so the paths match, mine was like this:

Computer\HKEY_LOCAL_MACHINE\SOFTWARE\WOW6432Node\Bentley\Rail Track(SELECTseries 4)

Save the cfg file then launch BRT - should load as expected. You may need admin rights to change this file.

Steve

RE: BRT fails to open on startup.

ctdick — Thu, 21 Feb 2019 02:59:35 GMT

Ok figured it out.

Changed the INROADS_PATH to look for the Rail Track(SELECTseries 4) registry key where it was looking for an InRoads (SELECTSeries 4) key that did not exist.

RE: BRT fails to open on startup.

ctdick — Thu, 21 Feb 2019 02:47:34 GMT

I am having the exact same issue. What did you modify in RailTrack.3.1.cfg?

RE: BRT fails to open on startup.

Steven Taylor — Mon, 18 Feb 2019 13:21:59 GMT

Took a while but have managed to solve this.

It appears RailTrack.3.1.cfg was not pointing to the registry correctly.