RE: Few queries

jpln — Tue, 20 Aug 2019 10:01:01 GMT

What do you export ? 2D or 3D ?

2D could keep arcs so reports and measurement in arcs should be the same. Spirals are not known in AutoCAD so they are a set of segments depending on the stroking setting.

3D can't keep any true geometry so stroking is used and could explain differences.

As long as AutoCAD only knows about lines and arcs (in a polyline) then export to DWG is the good way to export to AutoCAD.
If you want a true geometry then you need a civil package on AutoCAD and the XML export is still the best (or IFC).

RE: Few queries

Roshan Bucha — Mon, 12 Aug 2019 10:56:30 GMT

Hi Shakur,

Are you using regression tool in OpenRial Designer where you are realigning the existing track If that is the case you can use slew report from regression tools which give the difference between proposed Centerline and Existing Centreline.

For your reference how to use regression tool in OpenRail Designer please find the link :https://learn.bentley.com/app/VideoPlayer/LinkToIndividualCourse?LearningPathID=112027&CourseId=122868&MediaID=5015092

https://www.youtube.com/watch?v=kG2cD9dJLjk