https://communities.bentley.com/products/rail_design/f/openrail-forum/202334/corridor-clipping-plane-will-change-the-3d-modelHi, When adding a clipping plane to my corridor the 3D model gets a strange result? When delete the clipping it looks fine again? Does someone has the same experience? //christiaanen-USTelligent Community 12https://communities.bentley.com/thread/606951?ContentTypeID=1Tue, 01 Sep 2020 12:30:33 GMT6dad98f5-dbc9-4c4d-a9ba-e9da8dc6aa8e:503f6ca9-76be-4f23-9db2-6704447e5657jpln<p>Not sure to well understand what you want to add. Edges are mainly controlled by template interval, stroking (H and V set in feature definition), external points if used, key stations, clipping</p><div style="clear:both;"></div>https://communities.bentley.com/thread/606906?ContentTypeID=1Tue, 01 Sep 2020 07:43:03 GMT6dad98f5-dbc9-4c4d-a9ba-e9da8dc6aa8e:14a0d452-51f8-4434-931c-ffc36c288e07Christiaan Post<p>Ok and is it possible to add additional edges for road crossings for example?</p><div style="clear:both;"></div>https://communities.bentley.com/thread/606704?ContentTypeID=1Mon, 31 Aug 2020 07:45:15 GMT6dad98f5-dbc9-4c4d-a9ba-e9da8dc6aa8e:fc498315-3553-4ca8-a740-55f09552b265jpln<p>Yes not unsual. It must close the meshes and depending on the components and the clipping shape it has to retriangulate in such a way that you can see additional triangles in some locations. I even faced some issue when there are some transitions between templates. Note that rectangular faces of the components are not always planar. That is a reason why some additional edges are required.</p><div style="clear:both;"></div>