Hello!
Just doing some earthwork modelling in OpenRail and was wondering if there was a way to show components stagged within a template drop?
For context i'm trying to model soil nails at 1m spacings into a cutting and i'm trying to model the nails individually at a specified offset, however when I drop the template the model shows it as a continuous nail through the cutting, as shown in the image below.
I think moving forward the actual nails going into the earthworks will be removed as this wouldn't be seen in real life, but I would like to show the nails spaced out along the surface.
Let me know if you need any more information - Any help is appreciated!
You can model soil nails by a few methods.:
1.) Use a switch (parametric constraint) to turn on or soil nails at desired locations (this could result in a boat load of parametric constraints).
2.) Utilize the 'Horizontal Feature Constraint' within the Point Properties to find a Soil Nail Limit feature in a reference file that you create. When the Soil Nail Limit feature is found a display rule turns on the soil nail. If the Soil Nail Limit feature is not found then there is no soil nail. Caveat to this method is you’ll need a soil nail feature for each soil nail so use the MicroStation copy and instead of using 1 copy use an appropriate number.
I am sure there are other methods to achieve a solution to your problem, these are just two off the top of my head.
Good luck!
PEvans
Very interesting methods, I will definitely have to try both and keep you posted if they work.
Thank you!
Glad to help. Either method will work, but your template drop interval may need to be very small. Ask yourself if you need this LOD and is it worth the effort/processing time/setup time?