Hi Firendzzzzzzzzzz,
I am having a Problem in Plan and Profile Generation. i.e i want to generate Plan and profile with the scale of H:1:2000,V:1:500.
I am Generating profile with the exact scale. But Plan is geneating only 1:1000 or 1:1. I want to generate Plan also 1:2000 or 1:0.5
Present i am changeing text height only but i dont want to change the text height. i want to change the plan scale.
Please friends kindly help me how can i generate plan also with the same scale..
Thanks and Regards
Zakeer
Thank you for your Work flow. I used to do the same method. What I need is to generate the plan with 1:2000. means it should display 5m(1:1000) as 2.5 m(1:2000). when i measure in the plan it will be only 2.5m(but the chainage diff. is 5m). befor printing the drawing. I dont want to change the Profile Exaggeration it will be only H1:0.5 and V1:2 only...
THANK YOU FOR THE REPLY I WILL DO LIKE THIS ONLY
Jakeer
Thank you.
Presenet i am doing like that only.. not scaling but when taking print i am changeing the scale.
Still not sure to have well understood so I provide an example.
I have created a A0 PDF composition:
Steps to get it:
Dear JPLN,
I was clear about Jakeer issue, I am also facing the same problem.
You are right Plan & Profile generator helps us to define length required in each sheet and defined profile preferences working in PnP generator.
In plan and Profie Genrator tool,
If 1000m of length was defined in Plan tab and profile preferences with Horizontal & Vertical exaggeration of 1 and 4 respectively,(to get a profile with 1:10 scale) in Profile Tab the result is ok.
The issue is How I can get the Horizontal Scale (both in Plan View & Profile Views) of 0.5 exaggeration (to get 1:2000 Scale)?
Profile preferences can be defined good but Plan View doesnt give the required results after generation. If gives defined length of Plan view i.e 1:1, Profile is viewed with 0.5:4 (as required).
We require to submit some projects with those scales. Hope the issue was better explanined.
Give me the workflow for the best results.
Thanks
Ram Kumar