• Existing track geometry at regular (5m or 10m intervals)?

    Is it possible for BRT to produce a report that provides the existing track (CL) geometry at regular intervals (preferably 5m or 10m) rather than at the regression points?
  • Profile annotation

    Good afternoon sir, i am a new user of Rail track, i want to ask a question about profile annotation. when i create a profile annotation the shape is create by default, if i want to change the alignment curve shape and other symbol during annotation…
  • Horizontal Regression - Diagram

    Dear all, maybe someone could help me. My question is - where I do a mistake? Below is Diagram that I would receive i BRT. But in the end, I receive something like these: BPRT gives me a diagram with a 10 m interval. I am beginner. …
  • Bentley rail track taking dimensions between one track and the new horizontal postion of the other using tracking tool

    Bentley rail track taking dimensions between one track and the new horizontal postion of the other using tracking tool Is it possible to use the tracking tool to track between the design centre line from one track to the datum rail of another track…
  • Horizontal and Vertical Check Integrity Addin

    Dear all, I have formatted my C-Drive and re-installed Power Rail Track v08.11.07.536 and re-registered it. Later I found in reports that both Horizontal check integrity and vertical check integrity add ins are missing. Can anyone suggest me how to…
  • convert center line

    I Have 2 files ... Rail left and Rail right. I have import text ... horizontal and vertical. when i convert the center line i lost in new alignment i miss the vertical elements =0 but i have the horizontal elements . In proj. options = Inside rail. i…
  • RE: Power Railtrack R=(gl-g1)/L versus Radius

    To get it to chnage you need to select the vertical alignment you are editting in the Explorer and then change the type to Circular Defination.