• How to Reverse Stationing in Alignment without affecting curve parameter

    Hi, I have a one alignment file start from CH: -200 to CH: 14500 (Left to Right) , Now Alignment from CH 14500 to Ch 10000 (Right to Left) is fixed ( no modification required ) Now am modifying alignment from Chainage Ch: 7000 to 9000 Due to change…
  • Sectionizing alignment file

    Hi all, I'm looking for a method of dividing my horizontal alignment(s) into different sections, based on stationing, for drawing and data extracting purposes. I.e. from station 0+100 - 0+300 existing tracks are being adjusted, so i can assign a specific…
  • Bentley rail track taking dimensions between one track and the new horizontal postion of the other using tracking tool

    Bentley rail track taking dimensions between one track and the new horizontal postion of the other using tracking tool Is it possible to use the tracking tool to track between the design centre line from one track to the datum rail of another track…
  • Horizontal and Vertical Check Integrity Addin

    Dear all, I have formatted my C-Drive and re-installed Power Rail Track v08.11.07.536 and re-registered it. Later I found in reports that both Horizontal check integrity and vertical check integrity add ins are missing. Can anyone suggest me how to…
  • translate from PowerRailTrack to MX

    Hello, for a client I'm crating a bunch of rail-alignments (horizontal, vertical and cant), using PowerRailTrack V8i ss2 (08.11.07.685). He wants to receive my designs in a usable format -GENIO is preferred, and use those alignments in MXRoads for further…
  • Turnout on a spiral

    Hi Friends I have a question about designing turnouts on an spiral / transition curve with cant applied. We have a case where we need to replace 2 turnouts and a connection, with 2 new turnouts and a connection. We can't move the turnouts location…
  • Re: How to Design Reverse Transition

    Hi, A simple construction could be: Add a fixed radius R126.025 trailing transition L=25m Add a floating radius R152.075 leading transition L=30m: pick the first radius as the element to connect to But it depends on constraints. Regards…