• Station Equation and Major Minor stationing issue - Fix that worked for me

    Hi Have you ever experienced that when you have a station equation on you alignment, that viewing station major and minor is not shown. Even if the settings are correct in the xin. I have had this experience so I'm just sharing the solution that I found…
  • Display Turnouts - S&C Nose and Crossing

    Hello all I am in the process of creating some specific turnouts for use on a new project that specified the use of 1600mm broad gauge. All turnout definitions have been defined in a new turnout library and are all verified. I am happy with them My…
  • Bentley rail track taking dimensions between one track and the new horizontal postion of the other using tracking tool

    Bentley rail track taking dimensions between one track and the new horizontal postion of the other using tracking tool Is it possible to use the tracking tool to track between the design centre line from one track to the datum rail of another track…
  • convert center line

    I Have 2 files ... Rail left and Rail right. I have import text ... horizontal and vertical. when i convert the center line i lost in new alignment i miss the vertical elements =0 but i have the horizontal elements . In proj. options = Inside rail. i…
  • New Vehicle - Swept Path Analysis Rail Track SS2

    I'm having issues creating a custom vehicle and have not found any thread helpful on this matter. I've followed the instructions to create the control points but I cannot create a section I drew a shape in the model and it says successful completion but…
  • Turnout on a spiral

    Hi Friends I have a question about designing turnouts on an spiral / transition curve with cant applied. We have a case where we need to replace 2 turnouts and a connection, with 2 new turnouts and a connection. We can't move the turnouts location…
  • How to Design Reverse Transition

    Dear, I am trying to connect in 2 different radii curve with reverse transition with same langth, how to design id any one give me solution on this. Curve no 1 : R= 126.025 ( Trailing Transition required 25 m) Curve No 2 = 152.075 ( Leading Trans…
  • Using Create Verticals or 3D model

    Hi I'm designing af very complicated transition area where several of the turnouts are placed in curves with cant. I use Create Vertical function to design the vertical of the second alignment in the turnout. When I draw out the 3D alignment…
  • Bentley Rail Track - stationing snap function (easting and northing) discrepancy

    Hi please can anyone help? I'm currently using Bentley Rial Track V8i and Microstation SELECT series 3, and when I go to set the station (Geometry > Horizontal curve set > Stationing), using the snap button to snap on microstation, the easting and…
  • Re: A simple parabola transition...

    Hi, I've recently tested the various methods aviable in BRT (V8i series 2). See the attachement. It seems that WA method is the closest to your expectations ;) Altough, as u said, u can always use the clotoid for your transition curve. WS