• Missing link to excel from inside the XML viewer

    Hi community After doing a xlm-report I often forward the data to excel for further analysis. This I do by right clicking in the report data area and then chose the link to excel in the popup menu. I have a few colleagues to whom this link is not…
  • Profile annotation

    Good afternoon sir, i am a new user of Rail track, i want to ask a question about profile annotation. when i create a profile annotation the shape is create by default, if i want to change the alignment curve shape and other symbol during annotation…
  • Report Track Gauge for style sheet reports

    Can anyone tell me how to report what the track gauge is set to in BRT when reporting using the station offset report style sheets? I have created a new style sheet but I cant figure out how to report what the track gauge is set to for reporting offsets…
  • Curve widening for Two or more tracks

    Dear All, I have seen some blogs related to curve widening however, most of the solutions are considering the single track only. My problem is that i have either two or more tracks. I just want to confirm weather it is possible to assign the curve widening…
  • Horizontal and Vertical Check Integrity Addin

    Dear all, I have formatted my C-Drive and re-installed Power Rail Track v08.11.07.536 and re-registered it. Later I found in reports that both Horizontal check integrity and vertical check integrity add ins are missing. Can anyone suggest me how to…
  • Turnout connection editor - Single Slip turouts

    Hi I have a problem with single slip turnouts in Power Rail Track V8i (SELECT series 2) V08.11.07.615 I believe Power Rail Track does not calculate a proper alignment when connection is made to the turnout on the side which is NOT supposed to have…
  • RE: convert center line

    Purpose draw rail existing profile... low level the steps i do. 1- text import wizard ---->for horizontal alignment and Vertical alignment 2 alignmente= Lr and Rr 2- chekintegrity all Horz. and Vert. ok 3-Conver Center Line...like you sad. 4…
  • convert center line

    I Have 2 files ... Rail left and Rail right. I have import text ... horizontal and vertical. when i convert the center line i lost in new alignment i miss the vertical elements =0 but i have the horizontal elements . In proj. options = Inside rail. i…
  • Tentative Vertical Alignment and Cross Sections

    Dear All I have thee doubts in BRT. 1. I am importing survey data and creating surface. and I am creating a Horizontal alignment. My doubt is I need a Tentative Vertical based on the ground surface. is it possible or not. 2. I have a Cross…
  • Not Snapping with Micro station elements

    Dear all, I am using BRT V8i with microstaion V8i Select services-2 in the i am facing a small prblem i.e when i am using BRT command Like Move PI,Insert Pi when moving the geometry Alignment if i use microstation snaping tools to snap with end…
  • Cross Section Annotation For Every 5m or 10 m or for a Paticular Distance

    Dear All Thankfull for Responding my Questons I Have a Another Doubt and Problem, i am Creating cross sections in BRT it is coming good, When I am Annotating the Cross sections the offset and eelevations are showing at ground change points only…
  • ASCII Profile Annotation Elevations Not Showing

    Dear All, I am Creating a Profile By Using the ASCII file with .se file, when annotating this file Only Station showing in the Drawong Elevation Not Showing, What is the Problem, any other procedure is therre to shwon station elevation both in profile…
  • Standards for Railway Vertical Design

    Hi, Can anyone point out specific standards or theory regarding how much minimum length of vertical curve and distance between two vertical curve to be provided for New alignments . 1. Most standards focus on minimum radius but dont give particulars…
  • Perpendicular surface

    Hallo, i want to create a surface in the roadway modeler using an alternative surface option.But I want this surface to be perpendicular to the profile. For example the point for the alternative surface is at 1m distance from the vertical alignment, I…
  • PROFILE RAIL ELEVATION

    Dear All, I am facing a problem with rail elevation this is most importent for me to show rail elevation in the profile, our railways did'nt accept with out rail elevations, for rail elevation again i am going to auto cad. I am creating a horizontal…
  • Importing Elements as a text

    I have a data that contains the Coordinates of Beginning of Project, Tangent to spiral, Spiral to curve, Curve to Spiral, Spiral to tangent, radius of curve, length of curve, length of clothoid and I want to create an alignment from this points by importing…
  • Snap to an intersection point in Bentley Power Rail

    i prepared a grid of lines and i wanted to place the profile inside the grids since the alignments are all short segments for a station yard with a small length and i want to have some kind of order for my review. so what happened was in the past i was…
  • Cross section with Template

    Hello, I have created a template in rail track and I want it to be shown in every cross section that I cut. How do I attach, or activate the template to be displayed when I make cross section cuts along my alignment?
  • How to Snap to intersection point in Bentley Power Rail track

    i prepared a greed of lines and i wanted to place the profile inside the grids since the alignments are all short segments for a station yard with a small length and i want to have some kind of order for my review. so what happened was in the past i was…