• Transitions between templates

    Hello, Is it possible to create transition between templates properly, when I use point control in my corridor (in templates, which are before and behind my planned transition)? As example I tried to make a correct transition using Single track - ballasted…
  • Transitions used in power rail track

    Hi all, I'm trying to find the formulas/definition used for different transition types in power rail track and create new transition types or modify exisitng one . I have searched the reports, standards files but i cant able to find out it . Any…
  • I have modified the template from a corridor using editing roadway designer template drop in OpenRail. Now when I am trying to save the template my options are not active including template library organizer. How do I save the modified template.

    I have modified the template from a corridor using editing roadway designer template drop in OpenRail. Now when I am trying to save the template my options are not active including template library organizer. How do I save the modified template.
  • Horizontal criteria file (french standard) (SS2)

    Hello, does anyone know were i can found the file of horizontal design check for french standard (PRT SS2)? I need to update some old data. Many thanks, Zaher
  • Power Rail Track (ss4): " The exception: Index was outside the bounds of the array..."

    Hi! I've been trying to put some curve widening into my corridor. This message (2nd pic) keeps pops up when I try to submit the curve widening. First pic is from the table for my .wid file. Whats the problem? Thanks!
  • Calculate Earth work Quantity based on cross section

    Hi friends, I have some query about the earth work calculation when we generated cross section based on existing surface and design surface then normally the volume quantity comes fill & Cut some amount in the section and normal get the prepared sub…
  • Really disappointed from ORD

    I tried to use the new product of Bentley rail called “open rail designer”, I ‘m really disappointed from this product, I can’t understand this huge step back from Bentley developers. They had an amazing product called SS2 they murdered by this new…
  • Reports for left and right rail from centre line

    Dear All, I have the Centre line of the track (HAL VAL and Cant) now I want to generate report for Left and Right rail including cant Is there any way in which I can get this report from BRT ? Thanks&Regards, R.Bala Vignesh
  • XIN: not showing any selection in Geometry commands

    1. In Projectwise: loaded legacy XIN file into DGN file that has geometry created by using legacy methods (sorry, everyone hates that new DGN-based method). When trying to load any preferences or style into View geometry routines (View Horizontal Geometry…
  • Secondary routes - Railtrack

    Hello, do you use someone's secondary routes? I plan the platform and I need the components to draw always perpendicular to the adjacent track. I have set up secondary routes, see the picture. At the outer platform, everything works. Not at the island…
  • Annotation symbology

    Hi, Due to a change in the technical standards I need to create a new style of annotation. I have a problem with Cardinal Stations. How can I change the leader lines into arrowhead and seperate stationing from shortcut PKP ( start of the transition…
  • Turnout placed in curve with cant

    Hi! In our desing we are forced to place turnouts on the curve with applied cant/ respective on the transition curve. Profile in the turnouts are calculate using option "Create verticals" from mainline. Cant is applided so it is rotate about inside…
  • How to use On alignment and Off alignment points to import horizontal alignment

    Dear Designer When i'm trying to import horizontal alignment via" text import wizard" in step 4 , "Column Data format" drop down box appears . In which we can able to select the different types of attributes that PI can be assigned . In the list…
  • Report Geometry and Clerance

    Sorry my english I want to build a report in which I get the notable points of geometry plus/with the clerance points in order of stationing. It is possible??? Thanks Paulo Tomás
  • How setup google earth image view in SS4

    Hi, I have one doubt about the civil 3D there one option of using bing map like aerial map command that map assigning coordinates system it similarly in PRT method but in PRT only allows for only capture image type but i need that whatever coordinate…
  • Curve Maintenance

    Hi Rail experts, I would like to know if some of you are working on curve maintenance. I mean where you deal with a single curve to adjust curvatures (and cant) in order to get it back to normal/acceptable state. One method is to set marks at regular…
  • Issue with Duplication of Points in DTM

    Hai all While creation of DTM, importing Breakline features from survey data. Unfortunately i imported same elements thrice. i checked in the surface properties also it took 3 times of each element. i triangulated the DTM but i didn't found any features…
  • How to use of KMZ files in Alignment?

    I proposed my alignment in Google Earth at preliminary stage, saved in KMZ format. How can i use this File in PRT to prepare my Detailed Alignment further? Is there any additional tool require to convert in dwg format or i can use directly in PRT…
  • Any help to get videos for geometric design of Rail project

    I am very new to rail alignment design , please guide me where to start and share some videos Regards, Sreenivasulu Bachu
  • Scroll bar issues

    Bit of a weird one for you guys today Am having an issue with PowerRail Track SS2 and SS4 after getting my machine rebuit in the last month. Everything has reinstalled fine, and I have all my user preferences set up just the way I woud like. My only…
  • Unable to locate Corridor Baseline

    After clicking the "Create Corridor" i'm unable to locate corridor baseline. I'm getting below symbol. while i try to select alignment.
  • Power Rail Overhead line

    Can i convert GENIO file into .alg file . I have dgn file or GENIO file and want to work on PROL is it possible ?
  • RE: import file

    All these files are Rail Track files so they don't have to be imported but just opened through the Rail Track Files open command. The question is what do you want to do with the content ? Then it is when some training can help. In Power Rail Track SS4…
  • Colocar objetos 3d en Corredor de ferrocarril

    Alguien me puede orientar cómo puedo colocar elementos como las traviesas, los postes de la catenaria, la propia catenaria en un corredor de ferrocarril, generado en open Road SS4, y el cant generado en rail track y colocado como objeto del corredor?…
  • Genio Import

    Genio translator, to be checked in Application Add-ins, can import MX text files (Genio) to ALG and DTM. You have to set a translation table (.ggr file) from MX strings to alignment or features. MX has several string types that are related to dimensions…