• Transitions used in power rail track

    Hi all, I'm trying to find the formulas/definition used for different transition types in power rail track and create new transition types or modify exisitng one . I have searched the reports, standards files but i cant able to find out it . Any…
  • XIN: not showing any selection in Geometry commands

    1. In Projectwise: loaded legacy XIN file into DGN file that has geometry created by using legacy methods (sorry, everyone hates that new DGN-based method). When trying to load any preferences or style into View geometry routines (View Horizontal Geometry…
  • Secondary routes - Railtrack

    Hello, do you use someone's secondary routes? I plan the platform and I need the components to draw always perpendicular to the adjacent track. I have set up secondary routes, see the picture. At the outer platform, everything works. Not at the island…
  • How to add constraint in Double track Ballast?

    Hi All, how to add constraint like this double track ballast profile & transition with a single track, can anybody help me please, attached herewith .itl template file for my project. MPD_Project_Temp.itl
  • Report Geometry and Clerance

    Sorry my english I want to build a report in which I get the notable points of geometry plus/with the clerance points in order of stationing. It is possible??? Thanks Paulo Tomás
  • How setup google earth image view in SS4

    Hi, I have one doubt about the civil 3D there one option of using bing map like aerial map command that map assigning coordinates system it similarly in PRT method but in PRT only allows for only capture image type but i need that whatever coordinate…
  • Curve Maintenance

    Hi Rail experts, I would like to know if some of you are working on curve maintenance. I mean where you deal with a single curve to adjust curvatures (and cant) in order to get it back to normal/acceptable state. One method is to set marks at regular…
  • Guidance & Question On Alignments To Profile

    Hi all I have two questions regarding the Alignments To Profile Command, which I was hoping someone could shed some light on. Question 1 I have created a profile to display the exiting profile of the left hand rail. I use the command Alignment…
  • Bentley Rail track vs InRoads

    Hi All, May sounds daft, but what is the difference between latest InRoads (SS4) and Bentley Rail Track (SS4)? Versions look to be the same, and file size is very similar, and in Microstation - when loaded through BRT the dropdown is "InRoads suite…
  • RE: import file

    All these files are Rail Track files so they don't have to be imported but just opened through the Rail Track Files open command. The question is what do you want to do with the content ? Then it is when some training can help. In Power Rail Track SS4…
  • Merging the ballast template when producing a earthworks corridor

    Hi All, I am new to Bentley Rail Track and have been attempting to model earthworks for a set of railway lines. Modelling the earthworks is coming along well, however when two sets of rail lines run close to each other, the template for the sleeper…
  • Existing track geometry at regular (5m or 10m intervals)?

    Is it possible for BRT to produce a report that provides the existing track (CL) geometry at regular intervals (preferably 5m or 10m) rather than at the regression points?
  • How do you get the roadway designer to deal with CANT?

    Hi, To summarise; needing to create a 3D string which represents (for example) the edge of a station platform - set co-planar to the running rails. Currently playing around with templates and roadway designer which works well when there is zero Cant…
  • Measuring distances to nearest surface/mesh/element (or Point Cloud) along an alignment corridor - Gauging with Point Cloud Data

    I am trying to undertaking gauging exercise along an alignment against point cloud data. I have the alignment in CAD Bentley Rail Track format. I also have the point cloud data in surface/mesh form if needed. I need to record distances to nearest…
  • Report Template

    Dear All, While generating the reports, i am getting only one option to save the report in .xml. when i open the file in excel it becomes very big with lots of columns and rows. The manual says that i should get options to save the report in various…
  • Missing link to excel from inside the XML viewer

    Hi community After doing a xlm-report I often forward the data to excel for further analysis. This I do by right clicking in the report data area and then chose the link to excel in the popup menu. I have a few colleagues to whom this link is not…
  • How to change the parent alignment of a turnout?

    Hi, I have 5 section alignments which I am combining into a master route alignment. There are a number of turnouts I want to convert over to the master route as well. Each of these turnouts refer to 1 of the 5 the section alignments as the parent alignment…
  • Profile annotation (Diagram)

    Please tell me how to change diagram during profile annotation and, how to calculate existing data with Ground level, Formation level.
  • Profile Auto Annotation?

    Hi Working in BRT V8i, I am facing a issue in day by day kindly help to resolve. Is there any option that Auto Annotation of the profile without manual annotating for each change/time, like auto updation of Horizontal regression. I am regularly…
  • Report Track Gauge for style sheet reports

    Can anyone tell me how to report what the track gauge is set to in BRT when reporting using the station offset report style sheets? I have created a new style sheet but I cant figure out how to report what the track gauge is set to for reporting offsets…
  • Curve widening for Two or more tracks

    Dear All, I have seen some blogs related to curve widening however, most of the solutions are considering the single track only. My problem is that i have either two or more tracks. I just want to confirm weather it is possible to assign the curve widening…
  • Bentley rail track taking dimensions between one track and the new horizontal postion of the other using tracking tool

    Bentley rail track taking dimensions between one track and the new horizontal postion of the other using tracking tool Is it possible to use the tracking tool to track between the design centre line from one track to the datum rail of another track…
  • Bentley rail track taking dimensions between one track and the new horizontal postion of the other using tracking tool

    Is it possible to use the tracking tool to track between the design centre line from one track to the datum rail of another track to get the track intervals of its new postion relative to the other track.
  • RE: Importing Genio Workflow

    You need to define a matching table between strings (MX) and features (Rail Track). This is the .ggr file; Something like GC?? = H/V Alignment pairhttps://communities.bentley.com/cfs-file/__key/communityserver-discussions-components-files/5921/MX.ggr…