• CONNECTION EVENT CHENNAI – Transportation Forum

    I’m looking forward to making my second visit to India in six months when I travel to Chennai for amongst other things, the Transportation Forum at our CONNECTION event on June 9 th and 10 th 2015. We’re excited about this, the first opportunity to…
  • convert center line

    I Have 2 files ... Rail left and Rail right. I have import text ... horizontal and vertical. when i convert the center line i lost in new alignment i miss the vertical elements =0 but i have the horizontal elements . In proj. options = Inside rail. i…
  • Cant Gradient details in Curve set annotation in Inroads/Rail Track

    Is it possible to bring out "Cant Gradient" details in "curve set annotation"? if yes how do I do that?
  • Numbering Horizontal Curves in Inroads/ Rail Track

    I want to number my horizontal curves stating from anything other than 1 (say54). How do I do that in Inroads/ Rail Track?
  • Plan and profile Generation_H alg with different scale

    Hi Firendzzzzzzzzzz, I am having a Problem in Plan and Profile Generation. i.e i want to generate Plan and profile with the scale of H:1:2000,V:1:500. I am Generating profile with the exact scale. But Plan is geneating only 1:1000 or 1:1. I want…
  • Re: SS2 BRT

    Sonya, If you start InRoads and then close the InRoads explorer without closing MicroStation, the option to start Bentley Rail Track should appear under the Applications menu of MicroStation. You cannot install InRoads Group and Bentley Rail Track…
  • Tentative Vertical Alignment and Cross Sections

    Dear All I have thee doubts in BRT. 1. I am importing survey data and creating surface. and I am creating a Horizontal alignment. My doubt is I need a Tentative Vertical based on the ground surface. is it possible or not. 2. I have a Cross…
  • Not Snapping with Micro station elements

    Dear all, I am using BRT V8i with microstaion V8i Select services-2 in the i am facing a small prblem i.e when i am using BRT command Like Move PI,Insert Pi when moving the geometry Alignment if i use microstation snaping tools to snap with end…
  • Cross Section Annotation For Every 5m or 10 m or for a Paticular Distance

    Dear All Thankfull for Responding my Questons I Have a Another Doubt and Problem, i am Creating cross sections in BRT it is coming good, When I am Annotating the Cross sections the offset and eelevations are showing at ground change points only…
  • ASCII Profile Annotation Elevations Not Showing

    Dear All, I am Creating a Profile By Using the ASCII file with .se file, when annotating this file Only Station showing in the Drawong Elevation Not Showing, What is the Problem, any other procedure is therre to shwon station elevation both in profile…
  • BRT- Check integrity dialog is blank only in verticals.

    V08.11.05.47 The problem is in only my machine Computer. When I open Check integrity dialog for Horizontals I have results for integrity, everything is there. But in verticals its open blank … complety blank. I now it happens in only my…
  • Perpendicular surface

    Hallo, i want to create a surface in the roadway modeler using an alternative surface option.But I want this surface to be perpendicular to the profile. For example the point for the alternative surface is at 1m distance from the vertical alignment, I…
  • Re: [IR/BRT v8i] Check Vertical Integrity problem

    Robert, I have filed D-58779 to have this looked at. Thanks, Jason Smithey
  • PROFILE RAIL ELEVATION

    Dear All, I am facing a problem with rail elevation this is most importent for me to show rail elevation in the profile, our railways did'nt accept with out rail elevations, for rail elevation again i am going to auto cad. I am creating a horizontal…
  • Importing Elements as a text

    I have a data that contains the Coordinates of Beginning of Project, Tangent to spiral, Spiral to curve, Curve to Spiral, Spiral to tangent, radius of curve, length of curve, length of clothoid and I want to create an alignment from this points by importing…
  • Vertical Regression

    Dear Frnds, I Have a Existing Alignment With Grades and Curves, I Have to Calculate to Vertical Grades.when i am doing Regression I am Not getting the Grades, Any Body Tell me the Procedure to Regression for Vertical Grades Regards …
  • Re: SS1 compatibility of alg files

    Go to File> Save As and set the Save as type to Geometry Projects (*.alg). Click the Options button, set the desired version, and click OK. Enter a new file name and click Save. I hope this helps. Jason Smithey
  • Re: Plan and Profile Generator

    Andy, This is controlled by highlighting a surface on the Profile Controls tab of the Plan & Profile Generator command. Even though the checkboxes for the surfaces are turned on, you should highlight one of the surfaces to control the window shift…
  • Snap to an intersection point in Bentley Power Rail

    i prepared a grid of lines and i wanted to place the profile inside the grids since the alignments are all short segments for a station yard with a small length and i want to have some kind of order for my review. so what happened was in the past i was…
  • Re: Update vertical geometry after changing horizontal

    Karolin, If you are using Bentley Rail Track V8i or InRoads Group V8i, then there is a new toggled called "On Horizontal Edits Recompute Vertical Alignments" located under Tools> Options> Geometry. Click the Help button on that tab for more information…
  • Re: Site Visibility Tool

    Chris, Turn on the Pen Lock under Tools> Locks. If this is set to Pencil, the previous graphics will be erased. If this is set to Pen, the previous graphics will remain. I hope this helps. Thanks, Jason Smithey
  • Re: [IR/BRT v8i] Check Vertical Integrity problem

    Robert, Please see the following postings: http://discussion.bentley.com/cgi-bin/dnewsweb.exe?cmd=article&group=bentley.inroads&item=16015&utag = http://communities.bentley.com/Products/Rail_Design/f/5921/t/40300.aspx I…
  • Re: [IR/BRT v8i] Check Vertical Integrity problem

    Robert and Homie, The problem is that, as far as I know, no one here has been able to reproduce the steps that it takes to make these columns disappear. If you can come up with the steps to reproduce this problem and post them here, then our development…
  • How to Snap to intersection point in Bentley Power Rail track

    i prepared a greed of lines and i wanted to place the profile inside the grids since the alignments are all short segments for a station yard with a small length and i want to have some kind of order for my review. so what happened was in the past i was…