• How to Reverse Stationing in Alignment without affecting curve parameter

    Hi, I have a one alignment file start from CH: -200 to CH: 14500 (Left to Right) , Now Alignment from CH 14500 to Ch 10000 (Right to Left) is fixed ( no modification required ) Now am modifying alignment from Chainage Ch: 7000 to 9000 Due to change…
  • Changing a simple curve to a compound curve

    I have a simple curve in a complex geometry that I would like to change to a compound curve. What is the best way to do this? The workflow I was trying to use was to drop the complex geometry and create my desired alignment using the geometry connector…
  • Power Rail Track (ss4): " The exception: Index was outside the bounds of the array..."

    Hi! I've been trying to put some curve widening into my corridor. This message (2nd pic) keeps pops up when I try to submit the curve widening. First pic is from the table for my .wid file. Whats the problem? Thanks!
  • Cant editor fault

    Helo, I have a problem with description of Transition parametre of element and Radius in Cant editor. After I change cant manually at some curve to 0mm then Rail Track change Transition parametre to Linear and Radius is changed to 0 (as it is shown).…
  • ORLD Annotating Turnout

    Hi Everyone, I have a problem about annotation for Turnouts. I defined the turnouts in the file. And i want to annotate the turnouts like below. ( turnout import and annotate - 2:07 ) But when i annotate them, it becomes like this I tried…
  • How to change category of imported alignment from Road to Rail in Openrail Conceptstation?

    When importing track alignment from Bentley Rail Track into OpenRail ConceptStation via .xml, the category of element appears to be set to "Road" by default. See image attached. How can the category of an alignment be changed from Road to Rail or…
  • RE: import file

    All these files are Rail Track files so they don't have to be imported but just opened through the Rail Track Files open command. The question is what do you want to do with the content ? Then it is when some training can help. In Power Rail Track SS4…
  • RE: Turnout placement .3?

    As far as I know there is no way to use .3 The workflow is to place the turnout on a main track then connect another track or turnout using the connection editor. No way to first place the turnout on a branch. It would mean: no bending (unknown main…
  • Plan and profile Generation_H alg with different scale

    Hi Firendzzzzzzzzzz, I am having a Problem in Plan and Profile Generation. i.e i want to generate Plan and profile with the scale of H:1:2000,V:1:500. I am Generating profile with the exact scale. But Plan is geneating only 1:1000 or 1:1. I want…
  • Re: SS2 BRT

    Sonya, If you start InRoads and then close the InRoads explorer without closing MicroStation, the option to start Bentley Rail Track should appear under the Applications menu of MicroStation. You cannot install InRoads Group and Bentley Rail Track…
  • Tentative Vertical Alignment and Cross Sections

    Dear All I have thee doubts in BRT. 1. I am importing survey data and creating surface. and I am creating a Horizontal alignment. My doubt is I need a Tentative Vertical based on the ground surface. is it possible or not. 2. I have a Cross…
  • Not Snapping with Micro station elements

    Dear all, I am using BRT V8i with microstaion V8i Select services-2 in the i am facing a small prblem i.e when i am using BRT command Like Move PI,Insert Pi when moving the geometry Alignment if i use microstation snaping tools to snap with end…
  • Turnout on a spiral

    Hi Friends I have a question about designing turnouts on an spiral / transition curve with cant applied. We have a case where we need to replace 2 turnouts and a connection, with 2 new turnouts and a connection. We can't move the turnouts location…
  • Cross Section Annotation For Every 5m or 10 m or for a Paticular Distance

    Dear All Thankfull for Responding my Questons I Have a Another Doubt and Problem, i am Creating cross sections in BRT it is coming good, When I am Annotating the Cross sections the offset and eelevations are showing at ground change points only…
  • ASCII Profile Annotation Elevations Not Showing

    Dear All, I am Creating a Profile By Using the ASCII file with .se file, when annotating this file Only Station showing in the Drawong Elevation Not Showing, What is the Problem, any other procedure is therre to shwon station elevation both in profile…
  • Perpendicular surface

    Hallo, i want to create a surface in the roadway modeler using an alternative surface option.But I want this surface to be perpendicular to the profile. For example the point for the alternative surface is at 1m distance from the vertical alignment, I…
  • Turnout XML Report

    Hello, I am working with turnouts in RailTrack Ss2 and I am having issues, not really issues, but more of want/wonder. When I do the XML report, it gives me a report showing the horizontal components of the rail, such as the linear, circular, linear…
  • Profile annotation details to xml report format

    Hi Friends, In profile annotation i am selecting some tabs like station, existing,proposed,cut/fill heights. based on this i need a xml report. i ask some bentley people when visited to our office they said it can be possible you can customize your…
  • PROFILE RAIL ELEVATION

    Dear All, I am facing a problem with rail elevation this is most importent for me to show rail elevation in the profile, our railways did'nt accept with out rail elevations, for rail elevation again i am going to auto cad. I am creating a horizontal…
  • Importing Elements as a text

    I have a data that contains the Coordinates of Beginning of Project, Tangent to spiral, Spiral to curve, Curve to Spiral, Spiral to tangent, radius of curve, length of curve, length of clothoid and I want to create an alignment from this points by importing…
  • Roadway Designer - Turnout Transition Template

    I am having trouble with turnout transitions in the roadway designer. What is the best way to transition from a single track through a turnout to double track? Should I be using a special template for transition? Should I be using the Roadway Designer…
  • Re: How to Design Reverse Transition

    Hi, A simple construction could be: Add a fixed radius R126.025 trailing transition L=25m Add a floating radius R152.075 leading transition L=30m: pick the first radius as the element to connect to But it depends on constraints. Regards…
  • Re: BRT v8i SS2 - Curve Widening with Cant

    I just translated the template documentation. it may help you.
  • Re: Bentley Solvsighting Query

    Doing regression is not that difficult but you need some basics on Rail Track. You need to understand styles and preferences to get an automatic update of the sorted line. I believe it is mandatory to work efficiently on regression. Have a look on…
  • Vertical Regression

    Dear Frnds, I Have a Existing Alignment With Grades and Curves, I Have to Calculate to Vertical Grades.when i am doing Regression I am Not getting the Grades, Any Body Tell me the Procedure to Regression for Vertical Grades Regards …