• Plan and profile Generation_H alg with different scale

    Hi Firendzzzzzzzzzz, I am having a Problem in Plan and Profile Generation. i.e i want to generate Plan and profile with the scale of H:1:2000,V:1:500. I am Generating profile with the exact scale. But Plan is geneating only 1:1000 or 1:1. I want…
  • Re: SS2 BRT

    Sonya, If you start InRoads and then close the InRoads explorer without closing MicroStation, the option to start Bentley Rail Track should appear under the Applications menu of MicroStation. You cannot install InRoads Group and Bentley Rail Track…
  • Tentative Vertical Alignment and Cross Sections

    Dear All I have thee doubts in BRT. 1. I am importing survey data and creating surface. and I am creating a Horizontal alignment. My doubt is I need a Tentative Vertical based on the ground surface. is it possible or not. 2. I have a Cross…
  • Not Snapping with Micro station elements

    Dear all, I am using BRT V8i with microstaion V8i Select services-2 in the i am facing a small prblem i.e when i am using BRT command Like Move PI,Insert Pi when moving the geometry Alignment if i use microstation snaping tools to snap with end…
  • Cross Section Annotation For Every 5m or 10 m or for a Paticular Distance

    Dear All Thankfull for Responding my Questons I Have a Another Doubt and Problem, i am Creating cross sections in BRT it is coming good, When I am Annotating the Cross sections the offset and eelevations are showing at ground change points only…
  • Straight Line Diagram

    Is there a way to get a straight line diagram of my rail alignments?
  • Perpendicular surface

    Hallo, i want to create a surface in the roadway modeler using an alternative surface option.But I want this surface to be perpendicular to the profile. For example the point for the alternative surface is at 1m distance from the vertical alignment, I…
  • Re: [IR/BRT v8i] Check Vertical Integrity problem

    Robert, I have filed D-58779 to have this looked at. Thanks, Jason Smithey
  • PROFILE RAIL ELEVATION

    Dear All, I am facing a problem with rail elevation this is most importent for me to show rail elevation in the profile, our railways did'nt accept with out rail elevations, for rail elevation again i am going to auto cad. I am creating a horizontal…
  • Importing Elements as a text

    I have a data that contains the Coordinates of Beginning of Project, Tangent to spiral, Spiral to curve, Curve to Spiral, Spiral to tangent, radius of curve, length of curve, length of clothoid and I want to create an alignment from this points by importing…
  • Roadway Designer - Turnout Transition Template

    I am having trouble with turnout transitions in the roadway designer. What is the best way to transition from a single track through a turnout to double track? Should I be using a special template for transition? Should I be using the Roadway Designer…
  • BRT v8i SS2 - Curve Widening with Cant

    Hi, does anyone have experience with curve widening with cant? According to the readme this should be a new feature in SS2 but the online help is obviously not updated, os I don't see how to use it. I have to consider curve widening for the edge…
  • Bentley Rail Track - stationing snap function (easting and northing) discrepancy

    Hi please can anyone help? I'm currently using Bentley Rial Track V8i and Microstation SELECT series 3, and when I go to set the station (Geometry > Horizontal curve set > Stationing), using the snap button to snap on microstation, the easting and…
  • Adding transitions to simple curves

    Using Bentley V8i with Rail Track. I did a short layout for a main line track using simple reverse curves. I want to add transition spirals to the curves, but must the length of spiral and tangent length between curves is prescribed by the railway design…
  • Snap to an intersection point in Bentley Power Rail

    i prepared a grid of lines and i wanted to place the profile inside the grids since the alignments are all short segments for a station yard with a small length and i want to have some kind of order for my review. so what happened was in the past i was…
  • Re: Update vertical geometry after changing horizontal

    Karolin, If you are using Bentley Rail Track V8i or InRoads Group V8i, then there is a new toggled called "On Horizontal Edits Recompute Vertical Alignments" located under Tools> Options> Geometry. Click the Help button on that tab for more information…
  • Is there a way to rotate annotations in InRail?

    I'm new to InRail but have some proficiency with InRoads XM. My Inrail version is tied to V8i and I'm new to V8i as well. I'm trying to figure out how to rotate the annotations and stations that show up on the horizontal alignment. Any…
  • Re: [IR/BRT v8i] Check Vertical Integrity problem

    Robert, Please see the following postings: http://discussion.bentley.com/cgi-bin/dnewsweb.exe?cmd=article&group=bentley.inroads&item=16015&utag = http://communities.bentley.com/Products/Rail_Design/f/5921/t/40300.aspx I…
  • Re: [IR/BRT v8i] Check Vertical Integrity problem

    Robert and Homie, The problem is that, as far as I know, no one here has been able to reproduce the steps that it takes to make these columns disappear. If you can come up with the steps to reproduce this problem and post them here, then our development…
  • Cross section with Template

    Hello, I have created a template in rail track and I want it to be shown in every cross section that I cut. How do I attach, or activate the template to be displayed when I make cross section cuts along my alignment?
  • How to Snap to intersection point in Bentley Power Rail track

    i prepared a greed of lines and i wanted to place the profile inside the grids since the alignments are all short segments for a station yard with a small length and i want to have some kind of order for my review. so what happened was in the past i was…