• How to change the parent alignment of a turnout?

    Hi, I have 5 section alignments which I am combining into a master route alignment. There are a number of turnouts I want to convert over to the master route as well. Each of these turnouts refer to 1 of the 5 the section alignments as the parent alignment…
  • Does Bentley provide definitions of the equations it is using for spirals anywhere? Specifically I want to see the equation being used to define AREMA spirals?

    I have produced an xml file that our contractors equipment will use for construction of my company's designed alignment but I want to verify that their equipment will be replicating our spiral alignment with the options that they have available on that…
  • Profile annotation (Diagram)

    Please tell me how to change diagram during profile annotation and, how to calculate existing data with Ground level, Formation level.
  • Profile Auto Annotation?

    Hi Working in BRT V8i, I am facing a issue in day by day kindly help to resolve. Is there any option that Auto Annotation of the profile without manual annotating for each change/time, like auto updation of Horizontal regression. I am regularly…
  • Float Straight with Transition

    In MX Rail when you float a straight by point or bearing, you have the option to specify a transition length. Likewise when you free in a straight you can specify transition lengths on both sides. However in BRT when you float / free a straight…
  • Report Track Gauge for style sheet reports

    Can anyone tell me how to report what the track gauge is set to in BRT when reporting using the station offset report style sheets? I have created a new style sheet but I cant figure out how to report what the track gauge is set to for reporting offsets…
  • Curve widening for Two or more tracks

    Dear All, I have seen some blogs related to curve widening however, most of the solutions are considering the single track only. My problem is that i have either two or more tracks. I just want to confirm weather it is possible to assign the curve widening…
  • Bentley rail track taking dimensions between one track and the new horizontal postion of the other using tracking tool

    Bentley rail track taking dimensions between one track and the new horizontal postion of the other using tracking tool Is it possible to use the tracking tool to track between the design centre line from one track to the datum rail of another track…
  • Bentley rail track taking dimensions between one track and the new horizontal postion of the other using tracking tool

    Is it possible to use the tracking tool to track between the design centre line from one track to the datum rail of another track to get the track intervals of its new postion relative to the other track.
  • RE: Importing Genio Workflow

    You need to define a matching table between strings (MX) and features (Rail Track). This is the .ggr file; Something like GC?? = H/V Alignment pairhttps://communities.bentley.com/cfs-file/__key/communityserver-discussions-components-files/5921/MX.ggr…
  • Horizontal and Vertical Check Integrity Addin

    Dear all, I have formatted my C-Drive and re-installed Power Rail Track v08.11.07.536 and re-registered it. Later I found in reports that both Horizontal check integrity and vertical check integrity add ins are missing. Can anyone suggest me how to…
  • translate from PowerRailTrack to MX

    Hello, for a client I'm crating a bunch of rail-alignments (horizontal, vertical and cant), using PowerRailTrack V8i ss2 (08.11.07.685). He wants to receive my designs in a usable format -GENIO is preferred, and use those alignments in MXRoads for further…
  • Turnout connection editor - Single Slip turouts

    Hi I have a problem with single slip turnouts in Power Rail Track V8i (SELECT series 2) V08.11.07.615 I believe Power Rail Track does not calculate a proper alignment when connection is made to the turnout on the side which is NOT supposed to have…
  • Can I recreate rails/keypoints for part of an alignment?

    Hello, I'm working on a large city-rail (or tram) project, currently consisting of 47 alignments and 56 turnouts. I know my way around the LRM tools, so creating rails, keypoints and joints went OK. However, I just received a request for a change in…
  • CONNECTION EVENT CHENNAI – Transportation Forum

    I’m looking forward to making my second visit to India in six months when I travel to Chennai for amongst other things, the Transportation Forum at our CONNECTION event on June 9 th and 10 th 2015. We’re excited about this, the first opportunity to…
  • Error correction for survey data

    All the features in survey data has same error. Is there anyway if this can be resolved without re-creating DTM? Please help. Regards Yuvaraj
  • secondary alignments within roadway designer - BRT

    What is the use of it? and how do we include secondary alignments? Please describe with an illustration.
  • RE: convert center line

    Purpose draw rail existing profile... low level the steps i do. 1- text import wizard ---->for horizontal alignment and Vertical alignment 2 alignmente= Lr and Rr 2- chekintegrity all Horz. and Vert. ok 3-Conver Center Line...like you sad. 4…
  • convert center line

    I Have 2 files ... Rail left and Rail right. I have import text ... horizontal and vertical. when i convert the center line i lost in new alignment i miss the vertical elements =0 but i have the horizontal elements . In proj. options = Inside rail. i…
  • Clearance report rail+cant

    How do i do this? I have to replace wooden sleepers over a bridge and I have survey points on both left and right side of each sleeper set out on the bridge deck (see attached drawing). I need to know the distance between the bridge deck level…
  • RE: How Does BRT Calculate The Center Line of Track

    If I well understood you want to know the principle applied to calculate CL from rails. I didn't find any documentation on this but I just made some few tests. The result confirm what I guessed. I attached a PDF with a schema. the left rail is used…
  • New Vehicle - Swept Path Analysis Rail Track SS2

    I'm having issues creating a custom vehicle and have not found any thread helpful on this matter. I've followed the instructions to create the control points but I cannot create a section I drew a shape in the model and it says successful completion but…
  • Rotating feature points from Roadway Designer

    Hi! I was wondering whether it is possible to rotate the feature points generated from a template through Roadway Designer according to the alignement/corridor it is generated from (BRT). So far, the feature point is rotated according to top view…
  • Profile Annotation

    Hi All, I just want to know something about Power rail track:- 1. Is it possible to annotate two or more vertical alignment in the profile & How? 2. Like roadway designer Can we annotate the offset distance between two alignments in the profile…
  • RE: BRT, Swept envolop - how to add new vehicle(s) to Vehicle Library

    Hi, you may have a look at this content . There is a DGN to explain what must be done. Best Regards JPLN