• Station Equation and Major Minor stationing issue - Fix that worked for me

    Hi Have you ever experienced that when you have a station equation on you alignment, that viewing station major and minor is not shown. Even if the settings are correct in the xin. I have had this experience so I'm just sharing the solution that I found…
  • [V8i] End-Area Volume Problem in Cross Sections

    Hi everyone, i have a problem when i make volume calculations. I have a different type road section, with tunnel and with a channel between them. The road passes through a river so we make some culverts under the tunnels for construction. My problem…
  • Import geometry from graphics with transitions - Delete Multiple Elements

    Hi, I had imported a Horizontal geometry graphically with transitions using Import -> geometry wizard in power rail track. The transitions are added as bits of straight lines. I had also tried checking the box "All selected elements added to single…
  • CONNECTION EVENT CHENNAI – Transportation Forum

    I’m looking forward to making my second visit to India in six months when I travel to Chennai for amongst other things, the Transportation Forum at our CONNECTION event on June 9 th and 10 th 2015. We’re excited about this, the first opportunity to…
  • convert center line

    I Have 2 files ... Rail left and Rail right. I have import text ... horizontal and vertical. when i convert the center line i lost in new alignment i miss the vertical elements =0 but i have the horizontal elements . In proj. options = Inside rail. i…
  • Cant Gradient details in Curve set annotation in Inroads/Rail Track

    Is it possible to bring out "Cant Gradient" details in "curve set annotation"? if yes how do I do that?
  • Numbering Horizontal Curves in Inroads/ Rail Track

    I want to number my horizontal curves stating from anything other than 1 (say54). How do I do that in Inroads/ Rail Track?
  • Re: stripping

    Hay Tomas, Yes, I am computing end area volumes from Cross Section . I don't use materials option becouse that lesson I don't learn. So ,what I do?In END-AREA I go to: method standard , setup-stripping (km...,depth 0.2) ,-save…
  • Snap to an intersection point in Bentley Power Rail

    i prepared a grid of lines and i wanted to place the profile inside the grids since the alignments are all short segments for a station yard with a small length and i want to have some kind of order for my review. so what happened was in the past i was…
  • ASCII Profile Annotation Elevations Not Showing

    Dear All, I am Creating a Profile By Using the ASCII file with .se file, when annotating this file Only Station showing in the Drawong Elevation Not Showing, What is the Problem, any other procedure is therre to shwon station elevation both in profile…
  • BRT- Check integrity dialog is blank only in verticals.

    V08.11.05.47 The problem is in only my machine Computer. When I open Check integrity dialog for Horizontals I have results for integrity, everything is there. But in verticals its open blank … complety blank. I now it happens in only my…
  • Re: Annotate profile

    After analysis, it appears that there is some inconsistency between the settings in the annotate profile command. Certain objects will display "Empty Frames" if no data exists. Others will not. Cant and Speed are just such items. A defect has been filed…
  • Changing charset in xls report.

    Hi, When I generate a report in RailTrack the value of sloop and grade is typed in my choise of format (eg. 1,5 % or 0,015 ‰) But when I export the report to .xls format the charset parameter is set to ISO-8859-1 and this encoding cannot type the…
  • Re: Update vertical geometry after changing horizontal

    Karolin, If you are using Bentley Rail Track V8i or InRoads Group V8i, then there is a new toggled called "On Horizontal Edits Recompute Vertical Alignments" located under Tools> Options> Geometry. Click the Help button on that tab for more information…
  • Re: Site Visibility Tool

    Chris, Turn on the Pen Lock under Tools> Locks. If this is set to Pencil, the previous graphics will be erased. If this is set to Pen, the previous graphics will remain. I hope this helps. Thanks, Jason Smithey
  • Re: [IR/BRT v8i] Check Vertical Integrity problem

    Robert, Please see the following postings: http://discussion.bentley.com/cgi-bin/dnewsweb.exe?cmd=article&group=bentley.inroads&item=16015&utag = http://communities.bentley.com/Products/Rail_Design/f/5921/t/40300.aspx I…
  • Re: [IR/BRT v8i] Check Vertical Integrity problem

    Robert and Homie, The problem is that, as far as I know, no one here has been able to reproduce the steps that it takes to make these columns disappear. If you can come up with the steps to reproduce this problem and post them here, then our development…
  • How to Snap to intersection point in Bentley Power Rail track

    i prepared a greed of lines and i wanted to place the profile inside the grids since the alignments are all short segments for a station yard with a small length and i want to have some kind of order for my review. so what happened was in the past i was…
  • Perpendicular surface

    Hallo, i want to create a surface in the roadway modeler using an alternative surface option.But I want this surface to be perpendicular to the profile. For example the point for the alternative surface is at 1m distance from the vertical alignment, I…
  • V8i Civil Product Refresh

    Hello Civil Users, There is a problem which can occur in the following product versions under specific circumstances which might interest you. Affected versions are: Bentley GEOPAK Civil Engineering Suite V8i - 08.11.05.31 Bentley GEOPAK Site…
  • Re: [IR/BRT v8i] Check Vertical Integrity problem

    Robert, I have filed D-58779 to have this looked at. Thanks, Jason Smithey
  • PROFILE RAIL ELEVATION

    Dear All, I am facing a problem with rail elevation this is most importent for me to show rail elevation in the profile, our railways did'nt accept with out rail elevations, for rail elevation again i am going to auto cad. I am creating a horizontal…
  • Importing Elements as a text

    I have a data that contains the Coordinates of Beginning of Project, Tangent to spiral, Spiral to curve, Curve to Spiral, Spiral to tangent, radius of curve, length of curve, length of clothoid and I want to create an alignment from this points by importing…
  • benching/terracing a slope?

    how does this tool work if a wish to break up a slope evenly with benching? it doesnt seem to terrace a slope evenly with any input i have put in...
  • Vertical Regression

    Dear Frnds, I Have a Existing Alignment With Grades and Curves, I Have to Calculate to Vertical Grades.when i am doing Regression I am Not getting the Grades, Any Body Tell me the Procedure to Regression for Vertical Grades Regards …