• Tentative Vertical Alignment and Cross Sections

    Dear All I have thee doubts in BRT. 1. I am importing survey data and creating surface. and I am creating a Horizontal alignment. My doubt is I need a Tentative Vertical based on the ground surface. is it possible or not. 2. I have a Cross…
  • Not Snapping with Micro station elements

    Dear all, I am using BRT V8i with microstaion V8i Select services-2 in the i am facing a small prblem i.e when i am using BRT command Like Move PI,Insert Pi when moving the geometry Alignment if i use microstation snaping tools to snap with end…
  • Cross Section Annotation For Every 5m or 10 m or for a Paticular Distance

    Dear All Thankfull for Responding my Questons I Have a Another Doubt and Problem, i am Creating cross sections in BRT it is coming good, When I am Annotating the Cross sections the offset and eelevations are showing at ground change points only…
  • ASCII Profile Annotation Elevations Not Showing

    Dear All, I am Creating a Profile By Using the ASCII file with .se file, when annotating this file Only Station showing in the Drawong Elevation Not Showing, What is the Problem, any other procedure is therre to shwon station elevation both in profile…
  • Perpendicular surface

    Hallo, i want to create a surface in the roadway modeler using an alternative surface option.But I want this surface to be perpendicular to the profile. For example the point for the alternative surface is at 1m distance from the vertical alignment, I…
  • PROFILE RAIL ELEVATION

    Dear All, I am facing a problem with rail elevation this is most importent for me to show rail elevation in the profile, our railways did'nt accept with out rail elevations, for rail elevation again i am going to auto cad. I am creating a horizontal…
  • Importing Elements as a text

    I have a data that contains the Coordinates of Beginning of Project, Tangent to spiral, Spiral to curve, Curve to Spiral, Spiral to tangent, radius of curve, length of curve, length of clothoid and I want to create an alignment from this points by importing…
  • Re: SS1 compatibility of alg files

    Go to File> Save As and set the Save as type to Geometry Projects (*.alg). Click the Options button, set the desired version, and click OK. Enter a new file name and click Save. I hope this helps. Jason Smithey
  • Snap to an intersection point in Bentley Power Rail

    i prepared a grid of lines and i wanted to place the profile inside the grids since the alignments are all short segments for a station yard with a small length and i want to have some kind of order for my review. so what happened was in the past i was…
  • Re: Update vertical geometry after changing horizontal

    Karolin, If you are using Bentley Rail Track V8i or InRoads Group V8i, then there is a new toggled called "On Horizontal Edits Recompute Vertical Alignments" located under Tools> Options> Geometry. Click the Help button on that tab for more information…
  • How to Snap to intersection point in Bentley Power Rail track

    i prepared a greed of lines and i wanted to place the profile inside the grids since the alignments are all short segments for a station yard with a small length and i want to have some kind of order for my review. so what happened was in the past i was…