• Plan and profile Generation_H alg with different scale

    Hi Firendzzzzzzzzzz, I am having a Problem in Plan and Profile Generation. i.e i want to generate Plan and profile with the scale of H:1:2000,V:1:500. I am Generating profile with the exact scale. But Plan is geneating only 1:1000 or 1:1. I want…
  • Re: SS2 BRT

    Sonya, If you start InRoads and then close the InRoads explorer without closing MicroStation, the option to start Bentley Rail Track should appear under the Applications menu of MicroStation. You cannot install InRoads Group and Bentley Rail Track…
  • Tentative Vertical Alignment and Cross Sections

    Dear All I have thee doubts in BRT. 1. I am importing survey data and creating surface. and I am creating a Horizontal alignment. My doubt is I need a Tentative Vertical based on the ground surface. is it possible or not. 2. I have a Cross…
  • Not Snapping with Micro station elements

    Dear all, I am using BRT V8i with microstaion V8i Select services-2 in the i am facing a small prblem i.e when i am using BRT command Like Move PI,Insert Pi when moving the geometry Alignment if i use microstation snaping tools to snap with end…
  • Cross Section Annotation For Every 5m or 10 m or for a Paticular Distance

    Dear All Thankfull for Responding my Questons I Have a Another Doubt and Problem, i am Creating cross sections in BRT it is coming good, When I am Annotating the Cross sections the offset and eelevations are showing at ground change points only…
  • Perpendicular surface

    Hallo, i want to create a surface in the roadway modeler using an alternative surface option.But I want this surface to be perpendicular to the profile. For example the point for the alternative surface is at 1m distance from the vertical alignment, I…
  • V8i Civil Product Refresh

    Hello Civil Users, There is a problem which can occur in the following product versions under specific circumstances which might interest you. Affected versions are: Bentley GEOPAK Civil Engineering Suite V8i - 08.11.05.31 Bentley GEOPAK Site…
  • Re: [IR/BRT v8i] Check Vertical Integrity problem

    Robert, I have filed D-58779 to have this looked at. Thanks, Jason Smithey
  • PROFILE RAIL ELEVATION

    Dear All, I am facing a problem with rail elevation this is most importent for me to show rail elevation in the profile, our railways did'nt accept with out rail elevations, for rail elevation again i am going to auto cad. I am creating a horizontal…
  • Importing Elements as a text

    I have a data that contains the Coordinates of Beginning of Project, Tangent to spiral, Spiral to curve, Curve to Spiral, Spiral to tangent, radius of curve, length of curve, length of clothoid and I want to create an alignment from this points by importing…
  • Snap to an intersection point in Bentley Power Rail

    i prepared a grid of lines and i wanted to place the profile inside the grids since the alignments are all short segments for a station yard with a small length and i want to have some kind of order for my review. so what happened was in the past i was…
  • Re: Update vertical geometry after changing horizontal

    Karolin, If you are using Bentley Rail Track V8i or InRoads Group V8i, then there is a new toggled called "On Horizontal Edits Recompute Vertical Alignments" located under Tools> Options> Geometry. Click the Help button on that tab for more information…
  • Re: [IR/BRT v8i] Check Vertical Integrity problem

    Robert, Please see the following postings: http://discussion.bentley.com/cgi-bin/dnewsweb.exe?cmd=article&group=bentley.inroads&item=16015&utag = http://communities.bentley.com/Products/Rail_Design/f/5921/t/40300.aspx I…
  • Re: [IR/BRT v8i] Check Vertical Integrity problem

    Robert and Homie, The problem is that, as far as I know, no one here has been able to reproduce the steps that it takes to make these columns disappear. If you can come up with the steps to reproduce this problem and post them here, then our development…
  • How to Snap to intersection point in Bentley Power Rail track

    i prepared a greed of lines and i wanted to place the profile inside the grids since the alignments are all short segments for a station yard with a small length and i want to have some kind of order for my review. so what happened was in the past i was…