• Vertical Regression

    Dear Frnds, I Have a Existing Alignment With Grades and Curves, I Have to Calculate to Vertical Grades.when i am doing Regression I am Not getting the Grades, Any Body Tell me the Procedure to Regression for Vertical Grades Regards …
  • stripping

    I used stripping under fill when draw a rail template. When I calculate wolumes In the template apears two area numbers A1 ,A2(msq) ,one without and one with stripping. But the calculaton on the volume fill between two templates is not corect. It is much…
  • Re: SS1 compatibility of alg files

    Go to File> Save As and set the Save as type to Geometry Projects (*.alg). Click the Options button, set the desired version, and click OK. Enter a new file name and click Save. I hope this helps. Jason Smithey
  • Re: Plan and Profile Generator

    Andy, This is controlled by highlighting a surface on the Profile Controls tab of the Plan & Profile Generator command. Even though the checkboxes for the surfaces are turned on, you should highlight one of the surfaces to control the window shift…
  • Re: Changing size of dumbells

    Roy, Go to Geometry > View Geometry > Horizontal Annotation. Select the Styles tab. Notice the Style names listed for the Cardinal points. Now go to Tools > Style manager and select the style(s). On the Edit Style dialog, select the Geometry…
  • Re: stripping

    Hay Tomas, Yes, I am computing end area volumes from Cross Section . I don't use materials option becouse that lesson I don't learn. So ,what I do?In END-AREA I go to: method standard , setup-stripping (km...,depth 0.2) ,-save…
  • Snap to an intersection point in Bentley Power Rail

    i prepared a grid of lines and i wanted to place the profile inside the grids since the alignments are all short segments for a station yard with a small length and i want to have some kind of order for my review. so what happened was in the past i was…
  • Re: Update vertical geometry after changing horizontal

    Karolin, If you are using Bentley Rail Track V8i or InRoads Group V8i, then there is a new toggled called "On Horizontal Edits Recompute Vertical Alignments" located under Tools> Options> Geometry. Click the Help button on that tab for more information…
  • Re: Site Visibility Tool

    Chris, Turn on the Pen Lock under Tools> Locks. If this is set to Pencil, the previous graphics will be erased. If this is set to Pen, the previous graphics will remain. I hope this helps. Thanks, Jason Smithey
  • Re: [IR/BRT v8i] Check Vertical Integrity problem

    Robert, Please see the following postings: http://discussion.bentley.com/cgi-bin/dnewsweb.exe?cmd=article&group=bentley.inroads&item=16015&utag = http://communities.bentley.com/Products/Rail_Design/f/5921/t/40300.aspx I…
  • Re: [IR/BRT v8i] Check Vertical Integrity problem

    Robert and Homie, The problem is that, as far as I know, no one here has been able to reproduce the steps that it takes to make these columns disappear. If you can come up with the steps to reproduce this problem and post them here, then our development…
  • How to Snap to intersection point in Bentley Power Rail track

    i prepared a greed of lines and i wanted to place the profile inside the grids since the alignments are all short segments for a station yard with a small length and i want to have some kind of order for my review. so what happened was in the past i was…