In OpenRail Designer-2021 Release 1 update 10 version 10.10.01.03, I am working on the training set for Quick Start Rail Modeling. When I open the "Corridor-MainLine.dgn" file, I am unable to select the Cant I created in the "Rail_Geometry.dgn" file.…

Hi People, Hope everyone is doing good! Need some help in making tunnel covering (Pic 1) around my tunnel corridor (Pic 2). Please recommend some good solution, I want my corridor to look aesthetically good. Let me know if you need more details to get…

I want to create templates drops graphically by snapping them to the corridor from a reference, but the corridor says "Element is not snappable" although the corridor properties show that snappable is set. Does anyone else have this problem? Thanks…

Hi guys, I'm currently working with this template, observe the selected Line component, it has two ends right and left as marked below. Issue #1 My goal is to project the line ends to the tunnel inner ring. The level of this line will vary depending…

Hi, I am exporting component quantity reports, every time component order changing as shown in below picture. It is getting difficult to do manual mass haul calculations at 10m interval for about 55km. Do we have any option to keep the same component…

Hello, I am struggling with the problem- same in my work and revisiting the training dataset. When trying to assign cant to corridor, it would not allow me to select corridor. Tried Default (2D) model- it says this tool can't be used in 2D model.…

Good morning, I am very new to Openrails and have this issue as below. Error below is as below. From what I found my feature is 'final' and if I change it for 'design' nothing really happen. Interval 10m or 100m no difference. Construction…

Hi I am having an issue generating length within Quantities Report by Named Boundary, I am using the corridor design functions to generate the model. Can anyone advise me on how I can gather the length measurement when creating these reports, do I…

Hello again, This forum has been very helpful with my previous problems, but I have more Q's for anyone that can help! I have a terrain model that my corridor model is actively seeking as its end conditions and the corridor model itself is working…

Hi experts, I am testing a corridor drop that is 47m long. As a test I have set the drop interval at 4.7m I have also set the Handle length factor to 4.7m in Civil Standards (shown in cyan) My question is how do I get the drops to exactly match my…

Hello! Just doing some earthwork modelling in OpenRail and was wondering if there was a way to show components stagged within a template drop? For context i'm trying to model soil nails at 1m spacings into a cutting and i'm trying to model the nails…

Hello! As the title suggests, i'm having some issues having the sleepers that I have created staying on top throughout the template drop, they seem to become partially hidden and in some areas they disappear completely! I have attached below a little…

Hey forum! I'm kinda new to OpenRail and struggling with corridors at the moment. Is there a good tutorial for example merging two corridors, haven't really found a good one even though I've been scavenging the Bentley videos and Youtube. I want…

I was wondering if there is a way to use an existing Autocad drawing to make a component for a template. Since a rail or a sleeper has a lot of points and its difficult to make a template on these.

Hi all, I did some corridor testing in OpenRail (2020 Release 2 Update8) and noticed a strange behavior of Cant point controls. In this extreme case, I made a horizontal alignment, where a perpendicular line to certain points of the alignment would…

Hi All, I am working on a corridor where I have to apply both Cant and Curve widening. What happens in cant gets applied all over but when it comes to the curve widening in some cases the widening doesn't get applied. I am using the wid table…

Hello, do you use someone's secondary routes? I plan the platform and I need the components to draw always perpendicular to the adjacent track. I have set up secondary routes, see the picture. At the outer platform, everything works. Not at the island…

Hi Still using Bentley Rail S2 and trying to set up a template that allows the end condition slope to vary. Please see attached pic (red dashed line). Appreciate any advice and get-around methods to model this varying end condition slope (apart from…