• Cross Section Segment Dimension Annotations

    All I have created a template with parametrics/labels etc. that I would like to use for my single track renewal sites. I have labels created that can vary the depth of ballast and the width/height of ballast shoulders as well as the ballast crossfall…
  • Transitions between templates

    Hello, Is it possible to create transition between templates properly, when I use point control in my corridor (in templates, which are before and behind my planned transition)? As example I tried to make a correct transition using Single track - ballasted…
  • Cross section annotation

    Hi, I would like to ask about the descriptions of the cross sections. Specifically, I deal with the description of segments. Is it possible to somehow create an expression that would describe in a cell the points that would be given by FD? I would like…
  • Place Cell/Block Tool on Skewed Cross Sections in Power Rail Track

    Hi! The Place Cell/Block tool in Power Rail Track does not drop the cells we currently have on skewed cross sections (since the cuts along the tracks do not match the existing bridge skews). Like the text for the name of the alignments, cants, elevations…
  • ORD dynamic cross section - no components

    When I create a dynamic cross-section in ORD there are no components displayed. I can turn on the cut and fill graphics and null points, these display correctly but cannot seem to get the components to display. Is there a fix for this?
  • Template creation, End conditions

    Hi, I am facing a problem while creating a template, in my cross section I have a barrier at the both ends which are different types based on depth of Cut ( 4 Types) and height of Fill, and the same level. for Ex. Fill: Upto 1.5m Type A , 1.5m to…
  • End-area volumes problem

    Hey Power Civil SS4. 08.11.09.878. I have some issues with calculations of end-area volumes. It seems that Power Civil is calculating at each station, but not showing totals. It has worked on previous version 08.11.09.845. Edgaras
  • Two Elements on Importing into SS4

    All I am in PRT SS4 (have now switched as I have a W10 machine) and am looking for some help with alignments/ cross sections When I import my alignments from my ALG file into the DGN using the "Import form InRoads Memory" tool, I get two elements…
  • [V8i] End-Area Volume Problem in Cross Sections

    Hi everyone, i have a problem when i make volume calculations. I have a different type road section, with tunnel and with a channel between them. The road passes through a river so we make some culverts under the tunnels for construction. My problem…
  • How do you get the roadway designer to deal with CANT?

    Hi, To summarise; needing to create a 3D string which represents (for example) the edge of a station platform - set co-planar to the running rails. Currently playing around with templates and roadway designer which works well when there is zero Cant…
  • Difference in test and how the template actually works

    Hello! This problem occurs very often. Typically when I use "project to surface". If I turn of my control points of cant and alignment, the template goes down, on the level of the wrong working element I assume that the template is placed…
  • How to create a Toe Line of Embankment

    Hello, After Creating Template when i run the Roadway Designer, getting too many feature lines and want to show the Ditch / Fill (Intersect with Surface) above surface as Toe Line. My Template has 2 Conditions and Components Have 2 Conditions…
  • Dropped dimension styles in Cross sections and Profiles (PROL)

    This is a Power Rail Overhead Line related question. In the overheadline structure templates I added some dimensions to the structure. These dimensions show in the final sheet model after creating a cross section. However all dimensions are dropped…
  • Cross Sections - Remove certain Sections from Set

    Power Rail Track v.08.11.07.615 When the Set of Cross Sections is created (Sheet Layout, Single Sheet Each Model - crossections are created as individual Sheets in Design File, with attached reference borded), there is a need to exclude certain sections…
  • Cross section number

    Is it possible to annotate section number in cross sections ? (PowerRailTrack SS2)
  • RE: Adjust cross sections scales to the format (A3)

    Hi, The Global Scale Factor only has an effect on annotation: text, grid, cells, not the width of the cross section. Unfortunately BRT does not include a tool to automatically adjust scale to the format. It is something that has been requested but…
  • RE: Collusion free problem

    Is it an issue on cross section or profile ? In cross section you could annotate features instead of points. It means that all features of your dtm must have a style that enables crossing feature annotation and at least a small symbol or cell. But…
  • Cross section annotate tick problem

    Hello! I have a problem whit the ticks. I wish to have tick only on Offset frame. But the option for the length of the tick is common, and the annotation place a tick on the elevation to. http://prntscr.com/349g4s This is how the annotation makes…
  • Add cell to cross section update problem

    Hello! I want to make a two cell placement on same cross section set, but the command delete the previous placement. Is there a way to overlay with the previous cell placement ? Using Bentley Rail Track V8i
  • Cross Section - Show Ballast Section With Cant

    I have placed a cell for the tie in the cross sections that includes cant in the curves. My ballast section is a part of my template. Is there a way to make the ballast section match the tie in the sections where cant is applied?