• Is PowerRail & RailTrack (working under no longer supported V8i) vulnerable to malicious DGN files?

    In the vulnerability exposure described here: Common Vulnerability Exposure BE-2022-0020 | Bentley Systems it is stated the following: " MicroStation and MicroStation-based applications may be affected by out-of-bounds read and stack overflow vulnerabilities…
  • [Power Rail Track SS10] Importing tournout library issue

    translator Afrikaans Albanian - shqipe Arabic - ‎‫العربية‬‎ Armenian - Հայերէն Azerbaijani - azərbaycanca Basque - euskara Belarusian - беларуская Bengali - বাংলা Bulgarian - български Catalan - català Chinese - 中文(简体中文) …
  • View Active Vertical Alignment (PowerRail) Not Displaying Graphics

    The tool View Vertical Alignment is not producing any graphics on the profile I created. I also cannot see the highlighted vertical elements in the profile when I select them in the Check Integrity window.
  • in Swept Envelope Analysis (SS10 Power Rail) can't save new vehicle

    Hello, In a way, this is return to the previous question about new vehicle in VDE (Swept Envelope in other words). I need to create VDE for a specific vehicle, and since there is no option to create new vehicle in Open Rail, I have to use good old…
  • Transitions used in power rail track

    Hi all, I'm trying to find the formulas/definition used for different transition types in power rail track and create new transition types or modify exisitng one . I have searched the reports, standards files but i cant able to find out it . Any…
  • How to Reverse Stationing in Alignment without affecting curve parameter

    Hi, I have a one alignment file start from CH: -200 to CH: 14500 (Left to Right) , Now Alignment from CH 14500 to Ch 10000 (Right to Left) is fixed ( no modification required ) Now am modifying alignment from Chainage Ch: 7000 to 9000 Due to change…
  • Power Rail Track/ Bentley Rail Track slow down when amending alignments

    I was hoping someone could help solve a problem I have had for a while. I have received a new laptop but I have the same issue with BRT/PRT as I I did on the old laptop. I have major slow downs when amending alignments/geometry. As a simple example, I…
  • Projectwise and power rail SS10 - set project xin file with managed workspace

    Struggling to get a project xin file to be set when opening a power rail design file from within projectwise with a managed workspace applied. Have set the variable civil_xin_file in th pcf file, but on opening a file it loads the default civil xin from…
  • Tunnel Surface Menu in Power Rail Track SS4

    Gents, I can't find Tunnel Surface Menu under Evaluation Command in Power Rail Track SS4. Could anyone help me? Thanks Irwan Joe
  • How to edit/create multiple imported alignments with civil geometry then export to ALG PRT SS4

    I have been struggling with this all day. I have to create many different alignments as I am designing a rail yard. I have the existing rails as an ALG and have imported them using "Import Geometry." From there, I don't know how to edit and save…
  • How to export Design Surface to XML/.dtm in Power rail track SS4

    Hi Recently i have been trying to switch over from Power rail track SS2 to SS4. In SS2, we know Design surface stored as ".dtm". In SS4, Design surface generated is inside dgn model. My question is 1. How to export the Design surface…
  • I can't import my SS2 alg file to new PowerRailTrack SS4 (08.11.09.878)

    Hi everyone, I have an alg file in SS2 but i can't import it to new PowerRailTrack SS4 because it doesn't have ".alg" option in import section. it shows just ".xml" and ".fil". How can i import existing alignments to SS4?
  • Turn Out Library

    I have certain doubts in creating a new turnout in Turnout Library. What is branch element. is it the geometry upto Nose of crossing or heel of crossing. Does it include geometry of the switch. ? There is no option to specify the gauge of rail. The…
  • Crossover

    I am trying to create a cross over using connection editor tool. But the connecting alignment is irregular (pls see image below). I had even tried with create connection tool but the result is the same. When i use 'create verticals' tool on such connections…
  • Target Option in Power Rail Track

    In the connection editor , the connecting elements has an option "Target". This option appears only for linear elements and for curves it appears only if its the last among the connecting elements. I need help in understanding the option and an example…
  • Import geometry from graphics with transitions - Delete Multiple Elements

    Hi, I had imported a Horizontal geometry graphically with transitions using Import -> geometry wizard in power rail track. The transitions are added as bits of straight lines. I had also tried checking the box "All selected elements added to single…
  • Horizontal Curvature Drawing Taking time

    Hi, I am working on a rail project currently where i need to recreate alignment of an existing railway line. I used regression tools for doing the same. I imported the survey data which has centreline of tracks as polylines. Converted poly line to Horizontal…
  • Cant Gradient details in Curve set annotation in Inroads/Rail Track

    Is it possible to bring out "Cant Gradient" details in "curve set annotation"? if yes how do I do that?
  • Numbering Horizontal Curves in Inroads/ Rail Track

    I want to number my horizontal curves stating from anything other than 1 (say54). How do I do that in Inroads/ Rail Track?
  • RE: Power Railtrack R=(gl-g1)/L versus Radius

    To get it to chnage you need to select the vertical alignment you are editting in the Explorer and then change the type to Circular Defination.
  • earthwork template not working properly

    I am using a template with top of bank (fill) 8.87m wide, i needed 10m wide so amended it but after running it still shows a 8.87m wide, can any one plz have a look at this template and advise plz( its named as single track in attached itl file)
  • Uneven chainages generated in XML report - Whats the problem?

    Hi, I wanted to generate XML report (Power Rail) for vertical levels at regular "even" chainages. When i clicked 10m intervals, the chainage intervals in my XML report reads and is uneven: 1+15.324 1+25.324 1+35.324 1.45.324 My problem…
  • template

    hi every one, i am using power rail track when i run my earthwork template using express modeller a note book window open with using of failed end conditions in template but its does create earth work but use the same template in roadway modeller…
  • cut and fill

    hi every one i have few question about earth work in power rail track. Will keep it brief. 1-how to show cut and fill in different colours plan view, 2-how to show bridges and tunnels in different colour in vertical profile. 3-I think the end…
  • Plan and profile Generation_H alg with different scale

    Hi Firendzzzzzzzzzz, I am having a Problem in Plan and Profile Generation. i.e i want to generate Plan and profile with the scale of H:1:2000,V:1:500. I am Generating profile with the exact scale. But Plan is geneating only 1:1000 or 1:1. I want…