SIG Virtual Workshop: STAAD – Composite Beam Design to Eurocode Using RAM Beam, Part 2

SIG Workshop: STAAD – Composite Beam Design to Eurocode Using RAM Beam, Part 2
Host:  Badreddine Ziane, Senior Manager, Application Engineering, Bentley Systems, Inc.
Presenter:  Richard Tully, Advisory Support Engineer, Structural Bentley Systems, Inc.
Date/Time: April 23, 2020  11:00 A.M. CEST

Register Now!

This STAAD Special Interest Group virtual workshop is structured for users in EMEA and takes a deeper look at Composite Beam Design to the Eurocode Using RAM Beam, building upon our February session. Attendees will experience an introduction to the topic as well as see a worked example first-hand. Developed with your success in mind, the one-hour agenda will encompass:

  • Part 1: Introduction to Composite Beam Design
    • Overview of Composite Beam Design
    • Timeline of composite beam design with web openings as implemented in British/European design codes
    • Composite Beam Design with web openings, theory and practice
    • Setting out recommendations regarding web opening geometry
    • Web Openings in Composite Beams in accordance with the Eurocode
  • Part 2: Worked Example
    • Going through a worked example
    • Verification of Results

If you missed Part 1 of this series, no worries! When you register for April’s session, you will also have the option to review the On-Demand video.

STAAD SIGs for EMEA – complimentary virtual workshops to keep you working optimally. Connect today!