Ram Modeler Assigning Column Size (help)

You can't  directly see the label for the column sizes in plan view, the easiest thing to do is to change to the 3D view and select the View pull down menu followed by Members. IN this dialog box select Display Columns, Labels and then Size and apply these settings. You should then be able to see the labels for the column sizes. If you have a complex model with lots of members it may help to switch off some of the other members.

You can't  directly see the label for the column sizes in plan view, the easiest thing to do is to change to the 3D view and select the View pull down menu followed by Members. IN this dialog box select Display Columns, Labels and then Size and apply these settings. You should then be able to see the labels for the column sizes. If you have a complex model with lots of members it may help to switch off some of the other members.

Thanks for your respond, yes I hope soon they gonna have for these opion for plan as in the beginning cannot view in the 3D view unless model finish already.

You don't need to have the model completed to view it in 3D, all you need to do is assign story data as you are working up the model. Even if a floor is part complete you can view it in 3D if the story data is assigned for that level.