• State Verified Answer
  • +1 person also asked this people also asked this
  • Replies 10 replies
  • Answers 2 answers
  • Subscribers 114 subscribers
  • Views 10606 views
  • Users 0 members are here

Exception[access violation]Raised! Aborting Analysis.....

Julien Richard
Offline

Hello,

I try to run the analysis and CODE CHECK with a LOAD LIST using AISC 360-10 on a pretty big STAAD model and I receive the error message "Exception[access violation]Raised! Aborting Analysis....."

I have read other post on this forum relating that problem on which it says that it should be fixed with the release 20.07.10.65. However, I use release 20.07.10.66 and SS? and I still got that problem. If I reduce the number of load cases in the LOAD  LIST command, STAAD complete the analysis. I would like to know how I can run the analysis and CODE CHECK for all the load cases specified. You will find my STAAD.Pro model attached.

Thanks in advance,

Julien Richard, Eng, M.A.Sc.
HATCH

Building model.std

Parents
  • 0 Offline
    I got a memory overflow error when analyzing the file which is little different than what you got. So I added the Memory command as shown next at the beginning of the file and reanalyzed the file

    MEMORY 100
    STAAD SPACE
    START JOB INFORMATION
    ENGINEER DATE 29-Sep-15
    END JOB INFORMATION
    INPUT WIDTH 79
    …

    The analysis and design then ran fine. However I am using the latest STAAD.Pro 20.07.11.33 in which the design code routines have been further optimized to improve memory utilization.

    If you upgrade to the latest version, you should be able to design with all the load cases as part of the LOAD LIST. However in the older version that you are using, you may need to break up the CHECK CODE ALL command into a series of CHECK CODE MEMB … commands such that each block designs about 300 members.



    Answer Verified By: Julien Richard 

  • 0 Offline in reply to Sye
    Thank you. Adding the MEMORY command at the beginning of the file makes it work now even with the SS5. I however do not understand this command is not documented in the STAAD.Pro help.

    Regards,

    Julien Richard, Eng, M.A.Sc.
    HATCH
Reply Children
Communities
Support and Services
Training and Learning
Social Media