I am getting this error when I try and run the steel and column module??? Can I send you my model to see if you can find the issue?
I have been having this error as well and cannot seem to resolve it. I believe it is a very minor offset with a beam but cannot locate it. I have uploaded my model, the title being titled 4326-0036-00.
Your issue is the common case, a floating elevator core.
Thank you for your help! That resolved the current issue however, I receive an illegal framing issue on the same beam.
You also need a beam between the south columns along the slab edge (columns 93 and 108). Furthermore, there is a second elevator to deal with similarly.
Awesome, looks to run successfully. Thank you for your help Seth.
Hey Seth, I have come across another issue with that roof slab. The slab appears to sit below the beams and slopes in different directions. Some beams are also sloped but I am not sure of the cause. All story heights are set correctly. I will update my model in the system, same name.
Refer to: https://communities.bentley.com/products/ram-staad/w/structural_analysis_and_design__wiki/7207/ram-ss-3d-viewer-faq