FLOOR LOAD FOR SLOPED ROOF

The Floor Group which you defined should have closed areas only. Also, the truss between the columns spanning in global x direction are almost duplicate with the C purlin next to it. Is this by accident? I have attached a modified model where the floor load was assigned to the closed areas only and where the purlins close to the truss were deleted.

0121.sample_mod.std

Dear Sir,

I have problem that is unable to apply floor load for sloped roof..

Plz help me on issue.../

i have attached model for your reference../

6431.SAMPLE.std

Please find the attached modified model 

2335.6431.SAMPLE.std

I think it may be wrong sir, because the floor load is distributed to outer members only .../
The load should be applied to all members in roof sir.../
Plz help if anyone aware of it.../

Just for the records, the reason for the failure and also the corrected model is posted at

communities.bentley.com/.../389080

Just for the records, the reason for the failure and also the corrected model is posted at

communities.bentley.com/.../389080