Analysis

Question

Helo Sir/Mam 
 Im beginer of using Staad pro v8i ss6 
 my model is finish 12storey building 
 I have problem in analysis and design output..i can view only the 1st line til the 2400.. 
 finish..

Sye · Accepted Answer

You had a couple of duplicate surface elements 74 and 75 which were resulting in duplicate plates being generated. I took out the surface 75. 
 There were overlapping collinear beams 1828 and 1835 which is adressed too in the modified model attached below. 
 If you go to Geometry > Intersect Selected Members > Highlight you would see some members highlighted like member 4518 which is intersecting members like 4520 and 4522 but there is no connection. So at the node 1447, the member 4518 does not have any support as such. Please check for the other similar ones as well. 
 A modified file, with the first two corrections mentioned above, is attached for your reference. 
 2B+10-STOREY COMMERCIAL BLDG_modified.std

Kush · Answer

Hi Jonathan, 
 
Can you please upload your .std file.

Kush · Answer

Hi, 
 
Please follow the link below to upload your file. 
 communities.bentley.com/.../28129.how-can-i-upload-files-in-the-bentley-communities-forum