Dear Admin,
What is the way (in steps) to issue "inactive member command" through GUI not through STAAD(text) editor?
e.g. I have geometry defined and 3 load case. i want to have for each load case different member to be inactive. what are the steps?
Best Regards,
Move the Inactive command after the SUPPORTS command in the input file as shown below:
Here is my model. please correct me where i am wrong.
Thank you.
6318.Building_single-strut.STD
Hello sye,
i have used text editor and placed all my inactive members for different load cases accordingly followed by perform analysis and change command. I was not able to perform analysis. There is some error mentioning *** ERROR *** ABOVE COMMAND IS NOT RECOGNIZED. LINE IGNORED.
Hi Ivan,
Sye clearly mentioned in his answer that "If you have to define different set of inactive member specification for different load cases, you have to use the text editor". So, Text Editor is the only way.
Answer Verified By: Ivan Hadži Bošković