structure analysis with staad pro

Question

hello, 
 I want to analyse a structure, in the Staad output viewer it says that the solver used in the out-of-core basic solver but I want to use the in-core advanced solver. How can I do it ? 
 Thank you

ARIF AHAMED · Answer

Hello Alexandre norcaro, 
Advanced solver is only available for corporate versions of STAAD.Pro. 
If you have a paid licensed version of STAAD.Pro please visit the following link to sort out your query: communities.bentley.com/.../11117.what-is-staad-advanced-analysis

Rajat · Answer

You need to activate Advanced Analysis Engine from the STAAD.Pro Start page

Modestas · Answer

Here is some additional information about the in-core and out-of-core solvers which you may find useful: 
 
The engine can operate in two modes, in-core and out-of-core. The in-core solver will be used for models with under 20000 joints and the out-of-core solver for models over 20000 joints. In most situations, the in-core mode will provide the quickest solution, but where there is insufficient memory available, then the engine will use the out-of-core mode. Again, selection of the mode is automatically chosen by the analysis, but can be over-ridden. 
 
The full set of overrides for the advanced engine is: 
 
SET STAR -3 use in-core solver regardless of size 
 
SET STAR 4 use out-of-core solver regardless of size 
 
SET STAR 3 default 
 
SET STAR 0 use STAAD standard solver