Steel design (Code check to AS4100) running very slowly

RE: Steel design (Code check to AS4100) running very slowly

Modestas — Tue, 01 Aug 2017 06:18:07 GMT

That is correct. In such case, you need to check the design results in the Output file.

RE: Steel design (Code check to AS4100) running very slowly

Ouer (Oliver) HU — Tue, 01 Aug 2017 00:55:14 GMT

But I find that STAAD.Pro can only visualize the design result of the last "load list". It is very inconvenient.

RE: Steel design (Code check to AS4100) running very slowly

Ouer (Oliver) HU — Mon, 31 Jul 2017 00:19:49 GMT

Thanks a lot. This workaround works well for me. Hopefully, the updated STAAD.Pro will be available soon.

RE: Steel design (Code check to AS4100) running very slowly

Modestas — Fri, 28 Jul 2017 04:52:41 GMT

While this issue is fixed, you may use a temporary workaround. In order to run the design faster, you need to split a LOAD LIST command into multiple ranges. See the attached model as an examplecommunities.bentley.com/.../F3301B-SUPPORT_5F00_R6-_2D00_-Copy.zip. Once this is done, the design should be finished in less than 10 minutes.

RE: Steel design (Code check to AS4100) running very slowly

Modestas — Fri, 28 Jul 2017 04:29:27 GMT

This issue was acknowledged as a defect by the development team and was logged on the internal defect tracking system with a number 732066. It should be fixed in the upcoming STAAD.Pro versions.

RE: Steel design (Code check to AS4100) running very slowly

Modestas — Wed, 26 Jul 2017 06:47:55 GMT

It took 37 minutes to finish the analysis and design on my machine and this seems too long. Let me check with the development team if that is expected and get back to you.