Hi!
I am trying to model a deck on a set of roof beams. The joists in the grids extend beyond the enclosed beam grid. Is there a way I can model a deck, still having the RAM Steel Beam module to design the joists, instead of displaying "xxGSP" as the joist design?
You could eliminate the cantilevers altogether and simply use a large slab edge overhang. You'll get designs that way, though they could be unconservative.
Hey Seth!
Thank you for your prompt response. I have already tried the case you mentioned. But, like you have called out caution, that joist will now belong to a SP design case, I did encounter the "xxGSP" design. I would like to know how I can design the joists without specifying the depth.
Model short beams (of any material) between the tips of the cantilevers. Then model the slab edge out-board of those perimeter beams, Be aware that cantilevers on joists will also cause a special (SP) design case. See this for more: communities.bentley.com/.../ram-steel-joists-faq