**ERROR- IN READING MEMBER PROPERTIES. CHECK DATA FORMAT CAREFULLY.

RE: **ERROR- IN READING MEMBER PROPERTIES. CHECK DATA FORMAT CAREFULLY.

Dhanaji Bangar — Tue, 04 May 2021 07:16:18 GMT

i also having same pcommunities.bentley.com/.../DHANAJI.stdroblem .please help

RE: **ERROR- IN READING MEMBER PROPERTIES. CHECK DATA FORMAT CAREFULLY.

Abhisek M — Fri, 19 Mar 2021 13:02:16 GMT

Hello,

As communicated earlier I have modified the file. As American tube profile is not available I have used British profule of size 40405.0. Please see the attached file which runs okay in my system.

communities.bentley.com/.../5432.sludge-tank-1.0.std

RE: **ERROR- IN READING MEMBER PROPERTIES. CHECK DATA FORMAT CAREFULLY.

Mahmood Aamir Alsafadi — Fri, 19 Mar 2021 12:33:33 GMT

I already assign graphically the property but when I run analysis its the same error can you assign any wide flange for the structure just to run the analysis

RE: **ERROR- IN READING MEMBER PROPERTIES. CHECK DATA FORMAT CAREFULLY.

Abhisek M — Fri, 19 Mar 2021 12:27:16 GMT

For the steel W sections there are gaps in the name. You should delete the gaps so that they look like below.

MEMBER PROPERTY AMERICAN
2 9 25 26 28 34 44 TO 46 48 54 121 124 TO 129 133 TO 143 187 TO 190 -
193 TO 199 201 211 823 2255 2534 TABLE ST W21x275
15 16 29 TO 31 33 35 37 49 TO 51 53 55 57 148 206 214 215 821 822 1279 1281 -
1282 TO 1287 1408 1409 1722 2043 TABLE ST W21x223

17 TO 24 38 TO 43 58 TO 63 TABLE ST TUB40205

Regarding TUB40205, I could not find any such property in american database. can you please tell me from where you have taken this one. If you are editing in editor file, i would request you to assign property graphically to solve the issue.

RE: **ERROR- IN READING MEMBER PROPERTIES. CHECK DATA FORMAT CAREFULLY.

Mahmood Aamir Alsafadi — Fri, 19 Mar 2021 12:10:42 GMT

communities.bentley.com/.../sludge-tank-1.0.std

RE: **ERROR- IN READING MEMBER PROPERTIES. CHECK DATA FORMAT CAREFULLY.

Abhisek M — Fri, 19 Mar 2021 11:59:43 GMT

Can you please share the file here?

RE: **ERROR- IN READING MEMBER PROPERTIES. CHECK DATA FORMAT CAREFULLY.

Mahmood Aamir Alsafadi — Fri, 19 Mar 2021 11:43:50 GMT

I have the same problem after changing the dimension of beams and coulumn

RE: **ERROR- IN READING MEMBER PROPERTIES. CHECK DATA FORMAT CAREFULLY.

Mahmood Aamir Alsafadi — Fri, 19 Mar 2021 11:43:00 GMT

I also have the same problem cab you help me?

RE: **ERROR- IN READING MEMBER PROPERTIES. CHECK DATA FORMAT CAREFULLY.

Sye — Sat, 13 Feb 2021 18:01:23 GMT

The file that I sent you should run without any errors, see screenshot below. If you are running an older version of STAAD.Pro, make sure that you upgrade to STAAD.Pro CONNECT Edition ver 22.05.00.131

RE: **ERROR- IN READING MEMBER PROPERTIES. CHECK DATA FORMAT CAREFULLY.

Denise Yosa — Sat, 13 Feb 2021 06:52:56 GMT

thank you for the help. but the same error is still happenning

RE: **ERROR- IN READING MEMBER PROPERTIES. CHECK DATA FORMAT CAREFULLY.

Sye — Fri, 12 Feb 2021 23:59:00 GMT

There was no material assignment. Columns from 4.1m to 21.1m were missing properties. I assigned a 0.2m dia circular section to those. There was no loading. I added one load case with selfweight. There was no analysis command either which has now been added. Modified file attached for reference. communities.bentley.com/.../5-Storey-Plan_5F00_rev.std

RE: **ERROR- IN READING MEMBER PROPERTIES. CHECK DATA FORMAT CAREFULLY.

Denise Yosa — Fri, 12 Feb 2021 23:38:56 GMT

communities.bentley.com/.../5-Storey-Plan.std

RE: **ERROR- IN READING MEMBER PROPERTIES. CHECK DATA FORMAT CAREFULLY.

Sye — Fri, 12 Feb 2021 23:36:58 GMT

Your zip file just contains one file with extension .slg. You need to upload the .std file and no need to zip the file.

RE: **ERROR- IN READING MEMBER PROPERTIES. CHECK DATA FORMAT CAREFULLY.

Denise Yosa — Fri, 12 Feb 2021 23:28:37 GMT

communities.bentley.com/.../5-Storey-Plan.zip

RE: **ERROR- IN READING MEMBER PROPERTIES. CHECK DATA FORMAT CAREFULLY.

Sye — Fri, 12 Feb 2021 23:25:26 GMT

Please upload the .std file

RE: **ERROR- IN READING MEMBER PROPERTIES. CHECK DATA FORMAT CAREFULLY.

Denise Yosa — Fri, 12 Feb 2021 23:23:37 GMT

hello i have the same problem can you tell me what to do?

RE: **ERROR- IN READING MEMBER PROPERTIES. CHECK DATA FORMAT CAREFULLY.

Ness — Wed, 13 Jan 2021 14:26:16 GMT

Thank you. Correct. Different units have been used. I'll look into it to ensure it's done right.

RE: **ERROR- IN READING MEMBER PROPERTIES. CHECK DATA FORMAT CAREFULLY.

Abhisek M — Wed, 13 Jan 2021 13:56:22 GMT

The sequential order of input file is not right. I have edited your file and now it is running good. But, I have noticed that you have used different sets of units all over places. I would request you to review all the units once again in editor file to make sure all are as expected. Please keep the STAAD and .upt in a same folder to run the attached file.

communities.bentley.com/.../W361503099.zip

RE: **ERROR- IN READING MEMBER PROPERTIES. CHECK DATA FORMAT CAREFULLY.

Ness — Wed, 13 Jan 2021 13:34:54 GMT

communities.bentley.com/.../STAAD_5F00_BU_5F00_Section.zip

RE: **ERROR- IN READING MEMBER PROPERTIES. CHECK DATA FORMAT CAREFULLY.

Abhisek M — Wed, 13 Jan 2021 13:29:49 GMT

Try making a Zip folder.

RE: **ERROR- IN READING MEMBER PROPERTIES. CHECK DATA FORMAT CAREFULLY.

Ness — Wed, 13 Jan 2021 13:26:30 GMT

Doesn't allow me to upload the .upt file

RE: **ERROR- IN READING MEMBER PROPERTIES. CHECK DATA FORMAT CAREFULLY.

Abhisek M — Wed, 13 Jan 2021 13:22:16 GMT

There are some .upt files associated with this file. Please send them.

RE: **ERROR- IN READING MEMBER PROPERTIES. CHECK DATA FORMAT CAREFULLY.

Ness — Wed, 13 Jan 2021 13:18:56 GMT

communities.bentley.com/.../GEB-Evaluation.std

RE: **ERROR- IN READING MEMBER PROPERTIES. CHECK DATA FORMAT CAREFULLY.

Abhisek M — Wed, 13 Jan 2021 13:13:41 GMT

Can you please upload the file here?

RE: **ERROR- IN READING MEMBER PROPERTIES. CHECK DATA FORMAT CAREFULLY.

Ness — Wed, 13 Jan 2021 13:05:03 GMT

I have been having the same issue. Can you please advise how this issue was resolved?