Is there a way to Mirror/Reverse a Ram Structural system model?

This move and merge tool does not seem to be working for version 17.01.01.05. Is there an updated tool I can use to mirror my existing RAM model?

The tool is version independent. It is required to have RAM SS installed on the same machine and the model must be in the matching version of RAM SS, however. 

I have RAM installed and the model is in the same version. I keep getting errors when I try to run the mirror command. Do you know what is causing this?

This happens if you are using Ram DataAccess for RAM SS 17.01.01.05 with Microsoft Excel 32 bit. Do you have a 64 it version of Excel to use? If not I can send you some 32 bit dlls to install locally. 

I switched to a 64 bit version of Excel and that seems to let the tool run correctly. It does seem to have deleted half of my gridlines though. Is there a way to prevent this?

I have not run into that. Construction grids would not be moved, but defined grid systems should be.  It's easy enough to just change the coordinates of the grids to fix it though. If you go that route, make sure the grids are turned off of the plans first, otherwise moving the grids will stretch the model where grids intersections match support locations. 

I have not run into that. Construction grids would not be moved, but defined grid systems should be.  It's easy enough to just change the coordinates of the grids to fix it though. If you go that route, make sure the grids are turned off of the plans first, otherwise moving the grids will stretch the model where grids intersections match support locations.