*WARNING- NO MEMBERS LOADED FOR A WIND LOAD GENERATION.

RE: *WARNING- NO MEMBERS LOADED FOR A WIND LOAD GENERATION.

Hafizullah Amin — Sun, 20 Oct 2019 18:43:16 GMT

communities.bentley.com/.../3146.p1.std

HERE IS THE FILE

THANKS FOR RESPONSE

RE: *WARNING- NO MEMBERS LOADED FOR A WIND LOAD GENERATION.

Abhisek M — Sun, 20 Oct 2019 17:14:33 GMT

Can you please upload the .std file here? For first warning please refer below link.

https://communities.bentley.com/products/ram-staad/f/ram-staad-forum/118211/warning

For second warning, please check the range values. Wind load is generated on a closed panel. Please check the same.

RE: *WARNING- NO MEMBERS LOADED FOR A WIND LOAD GENERATION.

Hafizullah Amin — Sun, 20 Oct 2019 16:50:00 GMT

HELLO

i have two problem, i struggle lot but couldn't done it any one can help me.

WARNING- One or more lines are too long and will be split into 2 lines. and
*WARNING- NO MEMBERS LOADED FOR A WIND LOAD GENERATION.
this is the modelcommunities.bentley.com/.../p1.ANL

RE: *WARNING- NO MEMBERS LOADED FOR A WIND LOAD GENERATION.

dImeNsiOnFifTh — Tue, 14 Aug 2018 11:32:52 GMT

Yes it worked, i just noticed I didn't change one side of the range only.

RE: *WARNING- NO MEMBERS LOADED FOR A WIND LOAD GENERATION.

Abhisek M — Tue, 14 Aug 2018 10:48:00 GMT

you need to change those 4 lines. If you still get warning please check all ranges once again. If you still can not find out then upload the latest updated file.

RE: *WARNING- NO MEMBERS LOADED FOR A WIND LOAD GENERATION.

dImeNsiOnFifTh — Tue, 14 Aug 2018 09:55:19 GMT

Ofcourse, I forgot to change the ranges when I changed the building height, but unfortunately I'm still getting the warning. (Does the warning come after the line that has the issue or before it as a title?)

RE: *WARNING- NO MEMBERS LOADED FOR A WIND LOAD GENERATION.

Abhisek M — Sun, 12 Aug 2018 19:32:50 GMT

Dear user,

there are 2 observations for your structure.

1. Your structure contains duplicate beams. You can check the same under Utilities>Beam Tools> Duplicate Beams, as shown below. Please merge those beams .

2. The Y range provided for wind load along X direction for the top portion of the structure is not correct. Please check line # 7146,7151,7161,7169. Please check the co-ordinates for Y range and change

YR 52.8 55.8

YR 51.73 54.73.

You may also change the Y range for others as the max height is 54.73m instead of 55.8m. This will solve your issue.

Cheers!!