*WARNING- NO MEMBERS LOADED FOR A WIND LOAD GENERATION
I tried finding anything regarding this warning in the output viewer but found nothing. What could cause this warning to show up? I reviewed the applied wind load and everything looks normal. I have this warning repeated 4 times at different lines of the input.
File attached.
Thanks.
RESIDENTIAL BUILDING 23.std
3146.p1.std
HERE IS THE FILE
THANKS FOR RESPONSE
Can you please upload the .std file here? For first warning please refer below link.
https://communities.bentley.com/products/ram-staad/f/ram-staad-forum/118211/warning
For second warning, please check the range values. Wind load is generated on a closed panel. Please check the same.
HELLO
i have two problem, i struggle lot but couldn't done it any one can help me.
WARNING- One or more lines are too long and will be split into 2 lines. and *WARNING- NO MEMBERS LOADED FOR A WIND LOAD GENERATION.this is the modelp1.ANL
Yes it worked, i just noticed I didn't change one side of the range only.
you need to change those 4 lines. If you still get warning please check all ranges once again. If you still can not find out then upload the latest updated file.
Answer Verified By: dImeNsiOnFifTh