I have already input the ranges for the wind load along x
but still I get the warnings:
203. LOAD 3 LOADTYPE WIND TITLE WIND LOAD @ X 204. WIND LOAD X 1 TYPE 1 XR -0.819 31.479 YR -4 6.7 ZR -0.437 15.937 **WARNING-fx fy fz wind forces: 3.8429E-01 0.0000E+00 0.0000E+00 at coordinates: 1.1272E+01 0.0000E+00 -5.2478E-05 ignored. **WARNING-fx fy fz wind forces: 3.0742E-01 0.0000E+00 0.0000E+00 at coordinates: 1.4542E+01 0.0000E+00 -5.2478E-05 ignored. **WARNING-fx fy fz wind forces: 3.0742E-01 0.0000E+00 0.0000E+00 at coordinates: 1.4542E+01 3.2000E+00 -5.2478E-05 ignored. **WARNING-fx fy fz wind forces: 3.8430E-01 0.0000E+00 0.0000E+00 at coordinates: 1.1272E+01 -4.0000E+00 -2.8008E-07 ignored. **WARNING-fx fy fz wind forces: 1.1085E+00 0.0000E+00 0.0000E+00 at coordinates: 2.2272E+01 0.0000E+00 1.0635E+01 ignored. **WARNING-fx fy fz wind forces: 1.1085E+00 0.0000E+00 0.0000E+00 at coordinates: 2.2272E+01 3.2000E+00 1.0635E+01 ignored.
Please help
Check the answer posted here: https://communities.bentley.com/products/ram-staad/f/ram-staad-forum/169272/warning-fx-fy-fz-wind-forces-3-0742e-01-0-0000e-00-0-0000e-00-at-coordinates-1-1272e-01-3-2000e-00--5-2478e-05-ignored