Hello, I´m trying to analyze a model in STAAD.Pro V8i, said model consists of a slab as foundation, a perimetral RC wall and pedestals and beams to support the upper structure. The model has about 22000 plate elements and about 40 beams. Now to the problem, when I run the analysys of the model it takes hours to run; something thought was normal given the number of plates it has, but at some point the program shows a window with this message: "forrtl: severe (153): allocatable array or pointer is not allocated image PC Routine Line Source DFORMD.DLL 10006899 Unknown Unknown Unknown", however the analysys doesn´t stop there, it goes on for a while until it shows "ERROR NOT ENOUGH MEMORY FOR SPECTRUM FORCE-6" and then it stops with the analysys. The thing is the computer was fitted with a 32gb RAM card to be able to run the model and it still shows the error so I´m wondering if there´s a way to free up space for the analysys or if the problem may be related to processing power instead of simply memory. It´s worth nothing that the model is running with a CUT O F FREQUENCY of 325 and a CUT OFF MODE of 750 so that it can reach 90% mass participation factors. Here´s the model, if you see anything funny about it or just want more details just let me know. Any help with this issue will be greatly aprecciated.
Thanks in advance.
Basement model.std