I am working on a project simulating a pile supported mat foundation supporting a plant equipment (quadrilateral load).
The results do not check for punching shear and one way shear.
Under ‘Slab Designer’, in ‘Detailed Report’, there is supposed to be a tab ‘punching shear’. However it doesn’t show up on my model.
Under ‘cutting slab by a line’, it doesn’t show one way shear check. And, the moment curves do not appear either.
I have specified the coordinates of the lines, however when it comes to ‘Design Selected Line’, the plot is empty.
And, the legends somehow cannot be displayed. In Output View Options, I have checked the box ‘Show Legend’ but nothing shows up.
Any help is greatly appreciated.
Thanks
Hi Andrew
Thanks for the reply!
I was watching the tutorials where they mentioned in mat foundation design, we don't have to assign surface loads manually because it is automatically assigned.
I thought it may be the way I setup the load condition as well, so I deliberately set two point loads assigned to the columns.
However the 'Punching Shear' tab still does not appear in 'Detailed Report'.
Regards
James
Can you upload this model?