RAM Steel Beam Module requested feature

1. This has been asked for more than a few times over the years. Enhancement 120395:RSS DT Enhancement 100 - Undo in modules. 

2. Since the beam lengths are in the result reports, this does not come up that often. Our Steel Beam module is running an older graphics mode and it might requires us to update that to the 3D-view module style first, which is a project. 

Just to clarify, I'm not looking for beam lengths, but rather the ability to measure arbitrary distances like in the modeler. So if I wanted to see how far a beam was from a particular column, or confirm the resulting spacing on some generated infill beams, etc, I could simply click on 2 points and get the distance, like in the Modeler.

Just to clarify, I'm not looking for beam lengths, but rather the ability to measure arbitrary distances like in the modeler. So if I wanted to see how far a beam was from a particular column, or confirm the resulting spacing on some generated infill beams, etc, I could simply click on 2 points and get the distance, like in the Modeler.