How to pass steel members in Staad pro

RE: How to pass steel members in Staad pro

Modestas — Wed, 25 Sep 2019 12:24:48 GMT

All manuals can be found in STAAD.Pro Help by clicking on the Help icon on the right top corner of STAAD.Pro.

RE: How to pass steel members in Staad pro

Rahul M — Wed, 25 Sep 2019 11:32:02 GMT

can you provide me technical reference details and also user manual for staad pro steel structures.

RE: How to pass steel members in Staad pro

Rahul M — Wed, 25 Sep 2019 09:02:34 GMT

Thank you for your responce. this helped me.

RE: How to pass steel members in Staad pro

Sye — Tue, 24 Sep 2019 22:26:15 GMT

There were lot of redundant parameter commands in the design
If you use SELECT OPTIMIZED you should follow that up with a PERFORM ANALYSIS and CHECK CODE. Please refer to the technical reference for details.
You should also enter FIXED GROUP to group similar member
You need to use design parameters ( unbraced lengths, Unbraced lengths for compression flanges etc.) to control the design. Check out the list of design parameters specific to the Indian design code.
You may need to run multiple design cycles to get all members to pass.
You should design for only load combinations

I have attached a modified file which you may use as a guideline. However first you need to add the design parameters and group commands.

Also please ensure that you are using the latest version of STAAD.Pro CONNECT Edition ( 22.02.00.26)

communities.bentley.com/.../4300.Structure1.STD