https://communities.bentley.com/products/ram-staad/f/ram-staad-forum/186241/revit-loads-in-ram-structural-system-thru-ismHi. I created an ISM file from my Revit model. I was able to open the ISM in RAM Structural system. All beams, columns, slabs, etc. have been modelled, however, I am missing loads. I input a number of line loads and point loads in the Revit model viaen-USTelligent Community 12https://communities.bentley.com/thread/546142?ContentTypeID=1Fri, 27 Sep 2019 17:47:46 GMT6dad98f5-dbc9-4c4d-a9ba-e9da8dc6aa8e:e4fab2e7-7b41-45ec-99ce-1b96ae06d061Seth Guthrie<p>Here is a trick to use a background dxf that might help, but with line loads I worry about cases where the line loads are just slightly off of a beam.&nbsp;<a href="/products/ram-staad/w/structural_analysis_and_design__wiki/10314/ram-ss---using-dxf-as-a-reference-layout">https://communities.bentley.com/products/ram-staad/w/structural_analysis_and_design__wiki/10314/ram-ss---using-dxf-as-a-reference-layout</a>&nbsp;</p><div style="clear:both;"></div>https://communities.bentley.com/thread/546140?ContentTypeID=1Fri, 27 Sep 2019 17:42:59 GMT6dad98f5-dbc9-4c4d-a9ba-e9da8dc6aa8e:3ed0d0dd-25d9-4c62-8502-11a5dc8a87dcVAEngr<p>Thanks for the quick response. is there a way to quickly apply line loads in RAM Modeller. I have a large number of line loads and it can be very time consuming to add construction grids to define exact load locations. </p><div style="clear:both;"></div>https://communities.bentley.com/thread/546138?ContentTypeID=1Fri, 27 Sep 2019 17:39:15 GMT6dad98f5-dbc9-4c4d-a9ba-e9da8dc6aa8e:916b2a2a-ea11-442c-bca3-ec0a6a95dff7Seth Guthrie<p>RAM SS can export loads to ISM, but not import them.&nbsp;</p><div style="clear:both;"></div>