I am trying to run my model in RAM Steel but it is giving me a Fatal Error. Internal Error in Advance NodeList(). It says to run a data check. I ran a datacheck for my model and I am not getting any errors. What are some things I can check in the model?
I have also uploaded my file to Bentley Services.
For this error refer to: https://communities.bentley.com/products/ram-staad/w/structural_analysis_and_design__wiki/4552/ram-ss-common-framing-table-errors-tn
In your case, see below.
Thank you for the help! This solved my problem with the steel beam module. Although, I am having a problem with the concrete analysis. I have uploaded my latest model.
I am receiving a tolerance error and I am receiving the coordinates of the error but can not seem to fix the alignment issue. I have tried deleting the members and modeling them back, but it still doesn't work. Your help would be greatly appreciated. Thank you!
To eliminate the errors, segment walls like Wall #89 on the 2nd Floor Layout so that a wall end coincides with the tip of the extend cantilever of Beam #48 on the 1st Floor Layout. Examples of other affected locations are marked in the image below. The numbers in the image correspond to the wall numbers on the Second Floor. Beam numbers are not displayed in the image.